447-425
EMI/RFI Non-Environmental Band-in-a-Can Backshell
With Cable Clamp Strain-Relief
Rotatable Coupling - Standard Profile
Connector Designators:
MIL-DTL-38999 Series I, II (F)
MIL-DTL-38999 Series III and IV (H)
Basic Number
Connector Designator
Finish
Cable Entry
F and H
F-H
447 F S 425 M 18 12 - 5
ROTATABLE
COUPLING
Contact Style
Length: S only
(1/2 inch increments,
e.g. 8 = 4.00 inches)
Product Series
Shell Size
H
J
-
-
-
45°
90°
S
Straight
Length
(see Note 2)
.500 (12.7)
Max Typ
Length
(See Note 2)
A Thread Typ
(See Note 1)
See Note 6
Cable
Entry
Typ
B Type
(See Note 1)
K Typ
L Typ
STYLE II
SYMBOL ‘S’
STRAIGHT
(See Note 3)
Knurl Style
Mfr Option Typ
STRAIGHT
G
E
.880 (22.4)
Max
H
J Ref
Typ
J Ref
Typ
F
SYMBOL J
90°
SYMBOL H
45°
APPLICATION NOTES
H
1. Standard minimum length for Style I is 1 inch (25.4), Style II
is 1.5 inches (38.1). Consult factory about shorter lengths
(Note: Applies to Symbol S Straight only).
5. For shield termination see Glenair Drawings 600-050 and
600-052.
6. Material/Finish:
2. When cable diameter exceeds “Max Dash No” in Table I, Style
II will be supplied.
Adapters, Elbows, Coupling Nuts, Ferrule, Clamp - Al
Alloy/See Table I
Hardware - Cres/Passivate
3. For effective grounding, connector with conductive finish
should be used.
7. Metric dimensions (mm) are indicated in parentheses.
4. Glenair Series 600 Backshell Assembly tools are
recommended for assemply and installation.
© 2010 Glenair, Inc.
CAGE CODE 06324
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
H-22