447-325
Composite Standard Profile EMI/RFI
Banding Backshell with Shrink Boot Porch
and Self-Locking Rotatable Coupling
Drain Hole Option
Angle and Profile
CONNECTOR DESIGNATOR:
(Omit "D" if not required)
S - Straight
W - 90° Elbow
T - 45° Elbow
Finish Symbol
MIL-DTL-5015, -26482 Series II,
and -83723 Series I and III
A
(See Table II)
Shrink Boot Option
Shrink boot and
O-ring supplied
with T option
MIL-DTL-38999 Series I, II
MIL-DTL-38999 Series 1.5 (JN1003)
MIL-DTL-38999 Series III and IV
MIL-DTL-28840
F
L
Product Series
Basic Part
Number
Cable Entry
(See Table IV)
447 - EMI/RFI Non-Environmental
(Omit for none)
Banding Backshells
H
G
U
447 H S 325 XM 19 12 D K T S
DG123 and DG123A
Band Option
B = 600-052
K = 600-052-1
Bands are
Precoiled
(Omit for none)
Connector Designator
A, F, L, H, G and U
Connector Shell Size
Slot Option
S - Pigtail
Termin. Slot
(Omit for none)
SELF-LOCKING
(See Table III)
ROTATABLE COUPLING
STANDARD PROFILE
Add "T" to Part Number
for Standard Boot
T
H
Anti-Decoupling
Device
1.25 (31.8) Max.
Anti-Decoupling
Device
.44
(11.2)
Typ.
Pigtail
Termination
Slot
J
Entry
Diameter
Drain Holes
Optional
Accommodates
600-052 Band
Drain Holes
Optional
Shrink Sleeve
or Boot Groove,
Typ.
Raised Configuration
(Mfr's Option)
Entry Diameter
TABLE III: CONNECTOR SHELL SIZE (45°)
Accommodates
600-052 Band
Shell Size For
Max Entry
Dash No.
Connector Designator*
H
J
NOTES
(Table IV)**
± .09 (2.3)
± .06 (1.5)
A F/L H G U
1. 770-001S**-0 shrink boot supplied
with T option. See shrink boot product
pages for more details.
08 08 09
10 10 11
–
–
–
.72 (18.3)
.75 (19.1)
.75 (19.1)
.76 (19.3)
.78 (19.8)
.79 (20.1)
.82 (20.8)
.86 (21.8)
.89 (22.6)
.92 (23.4)
1.00 (25.4)
1.06 (26.9)
1.13 (28.7)
1.16 (29.5)
1.18 (30.0)
1.19 (30.2)
1.22 (31.0)
1.26 (32.0)
1.29 (32.8)
1.32 (33.5)
04
06
08
10
12
13
15
17
19
22
H
08
12 12 13 11 10
14 14 15 13 12
16 16 17 15 14
18 18 19 17 16
20 20 21 19 18
2. O-Ring will not be supplied with
Connector Designator A.
3. Coupling nut supplied unplated.
4. Consult factory for O-Ring to be
supplied with part less shrink boot.
22 22 23
24 24 25 23 22
28 25 24
–
20
5. Metric dimensions (mm) are in
parenthesis and are for reference only.
6. See Table I on Page H-26 for front-end
dimensional details.
–
–
**Consult factory for additional entry sizes available.
*See Page Table I on H-26 for additional connector front-end details.
Dimensions in inches (millimeters) and are subject to change without notice.
CAGE Code 06324
© 2011 Glenair, Inc.
Printed in U.S.A.
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
www.glenair.com
E-Mail: sales@glenair.com
H-34