Type 430P HV
Vishay Sprague
Metalized Polyester Film Capacitors
Wrap-and-Fill
FEATURES
• 2000 WVDC to 10,000 WVDC
• High stability
• Extensive standard ratings
• Rugged construction
• Small size
GUIDE TO APPLICATION
The outer wrap is sufficient to withstand rated voltage to
ground. Where high peak currents (AC or reverse voltages)
areinvolved,contactSprague® todeterminedevicesuitability.
PERFORMANCE CHARACTERISTICS
PHYSICAL CHARACTERISTICS
Operating Temperature: - 40°C to + 85°C.
Lead Pull: 5 pounds (2.3 kilograms) for 1 minute.
No physical damage.
Capacitance Range: 0.001µF to 0.39µF.
Capacitance Tolerance: ± 20%, ± 10%.
Voltage Rating: 2000 WVDC to 10,000 WVDC.
Dissipation Factor: 1.0% maximum.
Lead Bend: After three complete consecutive bends,
no damage.
Marking: Sprague® trademark, type or part number,
capacitance and voltage.
Life Validation Test: Rated voltage for 2000 hours @ + 40°C.
No visible damage. No open or short circuits.
Maximum ∆ CAP ± 10%.
Voltage Test: 120% of rated voltage for 5 minutes
through a limiting resistor of 50,000 ohms minimum.
Insulation Resistance:
At + 25°C: 25,000 Megohm - Microfarads or 50,000
Megohm minimum.
At + 85°C: 2500 Megohm - Microfarads or 5000
Megohm minimum.
Minimum IR = 50% of initial limit.
Maximum DF = 1.25%.
Humidity Test: 95% relative humidity @ + 40°C for 250
hours. No visible damage.
Maximum ∆ CAP ± 10%.
Minimum IR = 20% of initial limit.
Maximum DF = 2.0%.
Vibration Test (Condition B): No mechanical damage,
short, open or intermittent circuits.
DIMENSIONS in inches [millimeters]
1.750
[44.45]
Min.
L
1.750
[44.45]
Min.
D
Max.
± 0.062 [1.57]
Tinned Copper-Clad Steel Wire*
0.032 [0.81] Nominal Diameter (No. 20 AWG)
* Leads to be within ± 0.062" [1.57mm] of center line at egress but not less than 0.031" [0.78mm] from edge.
STANDARD RATINGS in inches [millimeters]
PART NUMBER
CASE SIZE
CAPACITANCE
± 20% TOLERANCE
± 10% TOLERANCE
D
L
(µF)
2000 WVDC
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
430P153X02K0
430P183X02K0
430P223X02K0
430P273X02K0
430P333X02K0
430P393X02K0
430P473X02K0
430P563X02K0
430P683X02K0
430P823X02K0
430P153X92K0
430P183X92K0
430P223X92K0
430P273X92K0
430P333X92K0
430P393X92K0
430P473X92K0
430P563X92K0
430P683X92K0
430P823X92K0
0.309 [7.85]
0.331 [8.41]
0.358 [9.09]
0.388 [9.86]
0.421 [10.69]
0.452 [11.48]
0.497 [12.62]
0.535 [13.59]
0.581 [14.76]
0.381 [9.68]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.00 [25.40]
1.750 [44.45]
For technical questions, contact spresale@vishay.com
Document Number: 42026
Revision 14-Nov-03
www.vishay.com
77