Series 110 / 410 / 510
Sockets for specific applications
Solder tail
70
Quad-in-line sockets and staggered (zig-zag) strips are suitable
for IC's with staggered double row Dual-in-line type pin
patterns. (e.g. NEC, etc…).
Double row staggered strips will also accommodate single-in-
line zig-zag memory packages on high density boards.
Display sockets
Insertion characteristics:
Partially equipped DIL and staggered strips: 4-finger standard
Quad-in-line and Display sockets: 6-finger low force
Ordering information
Platings
Sleeve
Clip
Pin
Replace 9x with required plating code, e.g. 410-9x-214-10-001
for a 5 µm Sn Pb / 0.75 µm Au becomes 410-93-214-10-001
91
93
97
99
5 µm Sn Pb
5 µm Sn Pb
5 µm Sn Pb
5 µm Sn Pb
0.25 µm Au
0.75 µm Au
Goldflash
5 µm Sn Pb
110-xx-314-10-001 fig. 1
110-xx-314-10-002 fig. 2
110-xx-316-10-003 fig. 3
Partially equipped DIL sockets
Insulator body dimensions see
page 50
Fig. 1
Fig. 3
Fig. 2
Please consult for versions not
shown
110-91-064-01-505
110-93-064-01-505
110-97-064-01-505
110-99-064-01-505
Quad-in-line socket
Rockwell packages with 2.22 mm
nominal row distance can also be
inserted
Important: Quad-in-line sockets
require a PCB drilling pattern
with 2.54 mm centerline distance
Staggered zig-zag strips
410-xx-214-10-001 left
410-xx-214-10-002 right
410-xx-216-10-001 left
410-xx-216-10-002 right
410-xx-220-10-001 left
410-xx-220-10-002 right
410-xx-224-10-001 left
410-xx-224-10-002 right
410-xx-228-10-001 left
410-xx-228-10-002 right
Not stackable A: 18.98 C: 4.94
002
right
Not stackable
Stackable
Stackable
Stackable
Stackable
Stackable
Stackable
Stackable
Stackable
18.98
21.52
21.52
26.60
26.60
31.68
31.68
36.76
36.76
4.94
4.94
4.94
4.94
4.94
4.94
4.94
4.94
4.94
001
left
510-91-010-01-504101 Fig. 1
510-97-010-01-504101
Display sockets for 7 segment
displays (1 or 2 digits)
510-99-010-01-783101
510-91-018-01-504101
510-97-018-01-504101 Fig. 2
510-99-018-01-783101
Fig. 2
Fig. 1