PIN RECEPTACLES
for 1,02 - 1,52 diameter pins (#03 contact)
and 1,5 - 1,6 diameter pins (#42 contact)
PINS
0433/8433
0435/0436
3,05 DIA.
0,79
Basic Part
Number
Length
A
2,67 DIA.
1,93
Basic Part
Number
0435-0
0436-0
Dia.
C
Length
K
4,06
2,77 DIA.
K
5,21
0433-0
8433-0
3,05
8,38
6,86
4,06
3,0
3,18
1,27
1,78
2,59 DIA.
6,48
7,37
2,54 DIA.
A
1,02 DIA.
X433-0-15-XX-03-XX-04-0
043X-0-15-XX-03-XX-10-0
Solder mount in 2,59 min.
mounting hole
Press-fit in 2,69 mounting hole
0434
4064
0342
• 0342 receptacle uses
2,69 DIA.
3,96 DIA.
1,27
Mill-Max’s new #42 Power
Contact. This receptacle will
accept the Ø1,55 0,05
power pins of ¼ brick
DC/DC converters.
3,05 DIA.
0,79
2,67 DIA.
3,81
5,08
0,51
3,56 DIA.
5,33
6,1
4,11
1,93
4,06
2,77 DIA.
5,21
2,13 DIA.
2,39 DIA.
6,86
1,98 DIA.
HOLE
• #42 contact has a very low
resistance path and is rated
for currents up to 50A.
2,59 DIA.
2,9
2,29
• #42 contact can be ordered
in standard receptacles that
use #03 contact; or it can be
specified as the spring
2,72
element inside custom made
receptacles for power
0434-0-15-XX-03-XX-10-0 4064-0-18-XX-03-XX-40-0 0342-0-15-XX-42-XX-10-0
Hex press-fit in 2,29 0,05
plated thru hole
Press-fit in 2,69 mounting hole
Surface mount
connector applications.
Mechanical Data #42 Contact:
Insertion/Extraction Force with a Ø1,55 (nominal) pin:
First Cycle
2nd & Subsequent Cycles
Insertion Force Extraction Force Insertion Force Extraction Force
20N
6N
10N
6N
Compliancy Test (the “spring back” characteristic of the contact to accept
Ø1,5 small pin after insertion of a Ø1,6 large pin):
Initial Cycle with Ø1,5 pin
Second Cycle with Ø1,6 pin
Third Cycle with Ø1,5 pin
Ins. Force Ext. Force Ins. Force Ext. Force Ins. Force Ext. Force
18N 6N 22N 7N 3N 2N
(Insertion/Extraction Forces are in Newtons and measured with polished
steel gage pins having elliptical shaped tips)
Contact/Pin combination Resistance Insertion Loss per pin @ 50A
#42/ Brass
#42/TeCu
.322mΩ
.213mΩ
.805W
.533W
ORDER CODE: XXXX - X - 15 - XX - XX - XX - XX - 0
BASIC PART #
SPECIFICATIONS
SHELL MATERIAL:
Brass Alloy 360, 1/2 Hard
SPECIFY SHELL FINISH:
SPECIFY CONTACT FINISH:
01 5,08 µm TIN/LEAD OVER NICKEL
80 5,08 µm TIN OVER NICKEL
27 0,76µm GOLD OVER NICKEL
01 5,08 µm TIN/LEAD OVER NICKEL
80 5,08 µm TIN OVER NICKEL
15 0,25µm GOLD OVER NICKEL
CONTACT MATERIAL:
Beryllium Copper Alloy 172, HT
DIMENSION IN INCHES
TOLERANCES ON:
LENGTHS:
DIAMETERS: 0,05
ANGLES: 2°
0,13
SELECT CONTACT
#03 (DATA ON PAGE 213) or#42 CONTACT
www.mill-max.com
516-922-6000
155