PIN RECEPTACLES
PIN RECEPTACLES
WITH ORGANIC FIBRE PLUG® SOLDER BARRIER
(SEE SPECIFIC CONTACT RANGE ON PAGES 250, 251 & 253)
• These through-hole (tubular) receptacles are designed for hand, wave or
*
reflow soldering. The ORGANIC FIBRE PLUG barrier prevents solder paste or
®
flux from contaminating the spring contact.
• After soldering, the OFP barrier is pushed out of the receptacle when the
®
device is plugged in.
• All parts are available as discrete receptacles or supplied on carrier tape per
EIA-481 to feed industry standard pick and place machines.
*Intrusive reflow (also called “pin-in-paste”) is a technique of using conventional through-hole
components in a reflow soldering process. The receptacles are placed into plated through-holes in the
circuit board (solder paste has previously been screen printed on pads adjacent to the holes) and the
board is reflowed in the same pass as other SMT components. Solder will fill the plated through-holes and achieve solder joints as reliable as wave soldering.
®
The OFP barrier prevents solder paste from being picked-up inside the contact during pick ‘n place assembly. “Overprinting” paste on the solder mask can be used
to adjust the volume of paste required to fill each hole.
4428
5359
0577
4015
4428-0-XX-XX-04-XX-10-0
Solder mount in Ø .032” max. PTH
#04 Contact for Ø .008” - .013” pins
Also available on 16mm wide carrier tape:
3,400 parts per 13”reel
5359-0-XX-XX-10-XX-10-0
Solder mount in Ø .043” ± .003” PTH
#10 Contact for Ø .012” - .017” pins
Also available on 16mm wide carrier tape:
3,000 parts per 13”reel
0577-0-XX-XX-21-XX-10-0
Solder mount in Ø .045” ± .003” PTH
#21 Contact for Ø .015” - .022” pins
Also available on 12mm wide carrier tape:
3,000 parts per 13”reel
4015-0-XX-XX-30-XX-10-0
Solder mount in Ø .057” ± .003” PTH
#30 Contact for Ø .015” - .025” pins
Also available on 8mm wide carrier tape:
5,500 parts per 13”reel
.048 DIA.
.010
.068 DIA.
.020
.058 DIA.
.025
.034 DIA.
.013
.052 DIA.
.089
.038 DIA.
.028 DIA.
.060
.086
.055
.028 DIA.
.100
.040 DIA.
.100
.064
.071
.0205 DIA.
.043 DIA.
.009
.031 DIA.
.009
.006
.009
ORDER CODE: XXXX - 0 - XX - XX - XX - XX - XX - 0
BASIC PART #
SPECIFICATIONS:
Shell Material: Brass Alloy 360, 1/2 Hard
Contact Material: Beryllium Copper Alloy 172, HT
Solder Barrier: Organic Fibre Plug®
Dimensions: Inches
SPECIFY CONTACT FINISH:
SPECIFY PACKAGING:
43 Discrete Receptacles
67 Supplied on 13”Reels
SPECIFY SHELL FINISH:
27 30 μ” GOLD OVER NICKEL (RoHS)
02 100 μ” TIN/LEAD OVER NICKEL
84 100 μ” TIN OVER NICKEL (RoHS)
Tolerances On: Lengths: ± .005
01 200 μ” TIN/LEAD OVER NICKEL
80 200 μ” TIN OVER NICKEL (RoHS)
RoHS-2
Diameters: ± .002
2011/65/EU
CONTACT:
Angles:
± 2 °
#04, #10, #21 or #30 CONTACT (DATA ON PAGES 250, 251 & 253)
Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: 516-922-9253 • www.mill-max.com