Datasheet > 3GDW576D-150T-FREQ

3GDW576D-150T-FREQ

更新时间： 2024-01-04 16:11:42

品牌	Logo	应用领域
EUROQUARTZ		/
页数	文件大小	规格书
1页	111K
描述
LVDS Output Clock Oscillator, 0.75MHz Min, 800MHz Max, SMD, 6 PIN

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

3GDW576D-150T-FREQ 数据手册

QUARTZ

EURO

GDW576 LVDS VCXO

750.0kHz to 800.0MHz

7 x 5 x 1.8mm SMD

Frequency range 750kHz to 800MHz

LVDS Output

Supply Voltage 3.3 VDC

Phase jitter 2.35ps typical

Pull range from ±30ppm to ±150ppm

DESCRIPTION

OUTLINE & DIMENSIONS

GDW576 VCXOs are packaged in a 6 pad 7 x 5mm SMD package.

Typical phase jitter for GDW series VCXOs is 2.35ps. Output is LVDS.

Applications include phase lock loop, SONET/ATM, set-top boxes,

MPEG , audio/video modulation, video game consoles and HDTV.

SPECIFICATION

Frequency Range:

Supply Voltage:

750kHz to 800.0MHz

3.3 VDC ±5%

Output Logic:

LVDS

RMS Period Jitter:

Peak to Peak Jitter:

Phase Jitter:

4.3ps typical

27.0ps typical

2.35ps typical

Initial Frequency Accuracy:

Tune to the nominal frequency

with Vc= 1.65 ±0.2VDC

1.4 Volts typical

Output Voltage HIGH (1):

Output Voltage LOW (0):

Pulling Range:

Control Voltage Range:

Temperature Stability:

Output Load:

1.1 Volts typical

From ±30ppm to ±150ppm

1.65 ±1.35 Volts

See table

50W into Vdd or Thevenin equiv.

0.5ns typ., 0.7ns max.

20% Vdd to 80% Vdd

50% ±5%

Rise/Fall Times:

Duty Cycle:

(Measured at Vdd-1.3V)

10ms maximum, 5ms typical

55mA typical, 60mA maximum

(At 202.50MHz)

Start-up Time:

Current Consumption:

Static Discharge Protection:

Storage Temperature:

Ageing:

Enable/Disable:

RoHS Status:

2kV maximum

-55° to +150°C

±2ppm per year maximum

See table

Fully compliant

PART NUMBERING

Example: 3GDW576B-80N-60.000

Supply Voltage

3 = +3.3V

Series Designator

GDW576

FREQUENCY STABILITY

Temp. Range

Stability Code Stability ±ppm

Stability over temperature range

(See table)

Pullability in ±ppm

Pullability determinator

N = minimum

M = maximum

T = Typical

Frequency in MHz

100

0°~+70°C

-40°~+85°C

100

If non-standard frequency stability is required

Use ‘I’ followed by stability, i.e. I20 for ±20ppm

ENABLE/DISABLE FUNCTION

Tristate Pad

Status

Output Status

Not connected

Below 0.3Vdd

(Ref. to ground)

Above 0.7Vdd

(Ref. to ground)

LVDS and Complimentary LVDS enabled

Both outputs are disabled (high impedance)

Both outputs are enabled

EUROQUARTZ LIMITED Blacknell Lane CREWKERNE Somerset UK TA18 7HE

Tel: +44 (0)1460 230000 Fax: +44 (0)1460 230001 info@euroquartz.co.uk www.euroquartz.co.uk

下载PDF

与3GDW576D-150T-FREQ相关器件

型号	品牌	描述	获取价格	数据表
3GDW576D-30M-0.750	EUROQUARTZ	LVDS Output Clock Oscillator, 0.75MHz Nom, SMD, 6 PIN	获取价格
3GDW576D-30M-60.000	EUROQUARTZ	LVDS Output Clock Oscillator, 60MHz Nom, SMD, 6 PIN	获取价格
3GDW576D-30M-FREQ	EUROQUARTZ	LVDS Output Clock Oscillator, 0.75MHz Min, 800MHz Max, SMD, 6 PIN	获取价格
3GDW576D-30N-0.750	MERCURY	Oscillator	获取价格
3GDW576D-30T-60.000	EUROQUARTZ	LVDS Output Clock Oscillator, 60MHz Nom, SMD, 6 PIN	获取价格
3GDW576D-30T-FREQ	EUROQUARTZ	LVDS Output Clock Oscillator, 0.75MHz Min, 800MHz Max, SMD, 6 PIN	获取价格