3D7701
MONOLITHIC GATED
DELAY LINE OSCILLATOR
(SERIES 3D7701)
FEATURES
PACKAGES
O1
NC
1
2
3
4
8
7
6
5
VDD
•
•
•
•
•
•
•
•
•
All-silicon, low-power CMOS technology
TTL/CMOS compatible inputs and outputs
Vapor phase, IR and wave solderable
Auto-insertable (DIP pkg.)
NC
O2
EN
O1
NC
NC
NC
NC
VDD
NC
NC
NC
O2
1
2
3
4
5
6
7
14
13
12
11
10
9
NC
GND
3D7701Z-xx SOIC-8
Frequency range: 0.3MHz through 100MHz
Frequency tolerance: 0.5% typical
NC
GND
NC
EN
Temperature stability: ±1.5% typical (-40C to 85C)
Vdd stability: ±0.5% typical (4.75V to 5.25V)
14-pin DIP available as drop-in replacements for
hybrid delay line oscillator (DLO31F)
8
3D7701-xx
DIP-14
3D7701K-xx NC pins removed
For mechanical dimensions, click here.
For package marking details, click here.
FUNCTIONAL DESCRIPTION
PIN DESCRIPTIONS
The 3D7701 Delay Line Oscillator product family consists of fixed-
frequency CMOS integrated circuit oscillators. Each package contains a
single oscillator, which is gated and can therefore be synchronized to an
external signal. The device frequency can range from 0.3MHz through
100MHz. The 3D7701 has two outputs that are in phase when the
oscillator is running, and can be used as a drop-in replacement for the
EN
O1
O2
Oscillator Enable
Oscillator Output 1
Oscillator Output 2
VDD +5 Volts
GND Ground
DLO31F hybrid oscillator. The 3D7701 is TTL- and CMOS-compatible, capable of driving ten 74LS-type
loads. It is offered in a standard 14-pin auto-insertable DIP and a space saving surface mount 8-pin SOIC
package.
TABLE 1: PART NUMBER SPECIFICATIONS
DASH
OUTPUT FREQUENCY (MHz)
NUMBER
25C
-40C to 85C
4.75<Vdd<5.25
0.3 ± 0.008
0.4 ± 0.010
0.5 ± 0.013
0.75 ± 0.019
1.0 ± 0.025
2.0 ± 0.050
2.5 ± 0.063
3.0 ± 0.075
4.0 ± 0.100
5.0 ± 0.125
7.5 ± 0.188
10.0 ± 0.25
20.0 ± 0.50
25.0 ± 0.63
30.0 ± 0.75
40.0 ± 1.00
50.0 ± 1.25
75.0 ± 3.75
100.0 ± 7.00
Vdd=5.00V
0.3 ± 0.002
0.4 ± 0.002
0.5 ± 0.003
0.75 ± 0.004
1.0 ± 0.005
2.0 ± 0.010
2.5 ± 0.013
3.0 ± 0.015
4.0 ± 0.020
5.0 ± 0.025
7.5 ± 0.038
10.0 ± 0.05
20.0 ± 0.10
25.0 ± 0.13
30.0 ± 0.15
40.0 ± 0.20
50.0 ± 0.25
75.0 ± 0.38
100.0 ± 0.50
-0.3
-0.4
-0.5
-0.75
-1
-2
-2.5
-3
-4
-5
-7.5
-10
-20
-25
-30
-40
-50
-75
-100
NOTE: Any dash number between 0.3 and 100 not shown is also available as standard.
2006 Data Delay Devices
Doc #06023
12/5/2006
DATA DELAY DEVICES, INC.
1
3 Mt. Prospect Ave. Clifton, NJ 07013