3M™ Mini D Ribbon (MDR) Connectors
.050″ Boardmount Through-Hole Right Angle Plug - Shielded
101 Series
• Wiper-on-wiper contact for reliable
repetitive plugging
• Rugged die cast metal case construction
• Screw or ground lock PCB retention
• Normal and reverse “D” interface options for
board to board flexibility
• IEEE 1284C Interface as a 36 contact connector
• Contacts: 20, 26, 36 and 50
• See Regulatory Information Appendix (RIA)
for chemical compliance information
TS-0620-B
Date Modified: November 26, 2007
Sheet 1 of 4
Physical
Insulation Material:
Flammability:
Color:
Glass Reinforced Polyester Body
UL 94V-0
Black
Contact Material:
Plating
Copper Alloy
Underplating:
Wiping Area:
Solder Tail Plating:
Body Material:
Plating
80 μ″ [ 2.0 μm ] Min. Nickel
30 μ″ [ 0.76 μm ] Min. Gold
Gold flash over Nickel (RIA E1 & C1 apply)
Zinc Alloy
Nickel
Ground Lock
Material:
Copper Alloy
Plating:
Tin in combination with Gold flash plated tail
3M Logo and Part Number
Marking:
Electrical
Current Rating:
Insulation Resistance:
Withstanding Voltage:
1 A
8
> 5 × 10 Ω at 500 VDC
500 VRMS for 1 Minute
Environmental
Temperature Rating:
-20°C to +85°C
Process Rating:
Solder Dip Test - 260°C for 10 secs., two times after 100°C max. preheat,
60 sec. max. duration
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373