HMC372LP3 / 372LP3E
v02.0605
GaAs PHEMT MMIC LOW NOISE
AMPLIFIER, 700 - 1000 MHz
5
Typical Applications
Features
The HMC372LP3 / HMC372LP3E is ideal for
basestation receivers:
Noise Figure: <1.0 dB
+34 dBm Output IP3
• GSM, GPRS & EDGE
• CDMA & W-CDMA
Gain: 15 dB
Very Stable Gain vs. Supply & Temperature
Single Supply: +5.0 V @ 100 mA
50 Ohm Matched Output
• Private Land Mobile Radio
Functional Diagram
General Description
The HMC372LP3 & HMC372LP3E are GaAs PHEMT
MMIC Low Noise Amplifiers that are ideal for GSM
& CDMA cellular basestation front-end receivers
operating between 700 and 1000 MHz. The amplifier
has been optimized to provide 1.0 dB noise figure, 15
dB gain and +34 dBm output IP3 from a single supply
of +5.0V @ 100 mA. Input and output return losses are
25 and 14 dB respectively with the LNA requiring only
four external components to optimize the RF Input
match, RF ground and DC bias. The HMC372LP3 &
HMC372LP3E share the same package and pinout
with the HMC356LP3 high IP3 LNA. A low cost,
leadless 3x3 mm (LP3) SMT QFN package houses
the low noise amplifier.
Electrical Specifications, TA = +25° C, Vs = +5V
Parameter
Min.
Typ.
810 - 960
14.5
0.008
1.0
Max.
Min.
11.5
Typ.
700 - 1000
14.5
0.008
1.0
Max.
Units
MHz
dB
Frequency Range
Gain
12.5
Gain Variation Over Temperature
Noise Figure
0.015
1.3
0.015
1.3
dB / °C
dB
Input Return Loss
25
25
dB
Output Return Loss
14
12
dB
Reverse Isolation
20
22
dB
Output Power for 1dB Compression (P1dB)
Saturated Output Power (Psat)
18
21
17
30
20
dBm
dBm
23.5
22.5
Output Third Order Intercept (IP3)
(-20 dBm Input Power per tone, 1 MHz tone spacing)
34
33
dBm
mA
Supply Current (Idd)
100
100
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 96