Features
■ Bushing mount
■ Designed for use in HMI applications
■ Optional AR pin feature
■ Plastic or metal shaft and bushings
■ Wirewound
■ Solder lugs or PC pins
■ Sealable (Full body seal)
3590 - Precision Potentiometer
Electrical Characteristics1
5.08 .38
(.200 .015)
Standard Resistance Range........................................................................................200 to 100 K ohms
Total Resistance Tolerance................................................................................................................±± ꢀ
Independent Linearity...................................................................................................................±0.2± ꢀ
Effective Electrical Angle ...............................................................................................3600 ° +10 °, -0 °
Absolute Minimum Resistance.....................................1 ohm or 0.1 ꢀ maximum (whichever is greater)
Noise.................................................................................................................100 ohms ENR maximum
Dielectric Withstanding Voltage (MIL-STD-202, Method 301)
5.08 .38
(.200 .015)
6.99 .38
(.275 .015)
10.31 + .00/- .13
(.406+.000/-.005)
BUSHING DIAMETER
(SEE PART NUMBERS)
1
2
3
.81
(.032)
Sea Level ..............................................................................................................1,±00 VAC minimum
Power Rating (Voltage Limited By Power Dissipation or 4±0 VAC, Whichever is Less)
+40 °C........................................................................................................................................2 watts
+12± °C........................................................................................................................................0 watt
Insulation Resistance (±00 VDC)......................................................................1,000 megohms minimum
Resolution .............................................................................................See recommended part numbers
SHAFT DIAMETER
.25
(.010)
(SEE PART NUMBERS)
1.19
(.047)
(PLASTIC VERSIONS)
7.92
(.312)
Environmental Characteristics1
.81 .25
(.032 .010)
(METAL VERSIONS)
Operating Temperature Range.......................................................................................+1 °C to +12± °C
Storage Temperature Range.........................................................................................-±± °C to +12± °C
Temperature Coefficient Over Storage Temperature Range2 ...........................±±0 ppmꢁ°C maximumꢁunit
Vibration..............................................................................................................................................1± G
Wiper Bounce ...............................................................................................0.1 millisecond maximum
Shock..................................................................................................................................................±0 G
Wiper Bounce ...............................................................................................0.1 millisecond maximum
Load Life ...................................................................................................................1,000 hours, 2 watts
Total Resistance Shift...................................................................................................±2 ꢀ maximum
Rotational Life (No Load)................................................................................1,000,000 shaft revolutions
Total Resistance Shift...................................................................................................±± ꢀ maximum
Moisture Resistance (MIL-STD-202, Method 103, Condition B)
20.62 .81
(.812 .032)
18.6 .4
(.732 .015)
12.2
(.48)
STANDOFFS
15.54
(.612)
R
11.81
(.465)
12.70
(.500)
MOUNTING SURFACE
22 .38
(.875 .015)
DIA.
DIA.
Total Resistance Shift...................................................................................................±2 ꢀ maximum
IP Rating
Sealed Versions (-3, -4, -7, and -8)...............................................................................................IP 6±
Unsealed Versions (-1 -2, -±, and -6)............................................................................................IP 40
RECOMMENDED PC BOARD MOUNTING HOLE LOCATIONS
HOLE DIAMETER
FMS
Mechanical Characteristics1
2.08
(.082)
CCW
CW
3
Stop Strength.............................................................................................4± N-cm (64 oz.-in.) minimum
Mechanical Angle...........................................................................................................3600 ° +10 °, -0 °
Torque (Starting & Running).................................................0.3± N-cm (0.± oz.-in.) maximum (unsealed)
1.1 N-cm (1.± oz.-in.) maximum (sealed)
Mounting ............................................................................................±±-80 N-cm (±-7 lb.-in.) (plastic)
170-200 N-cm (1±-18 in.-lb.) (metal)
2
1
CW
5.08 5.08 6.99
(.200) (.200) (.275)
Shaft Runout......................................................................................................0.13 mm (0.00± in.) T.I.R.
Lateral Runout....................................................................................................0.20 mm (0.008 in.) T.I.R.
Shaft End Play ...................................................................................................0.2± mm (0.010 in.) T.I.R.
Shaft Radial Play................................................................................................0.13 mm (0.00± in.) T.I.R.
Pilot Diameter Runout........................................................................................0.08 mm (0.003 in.) T.I.R.
Backlash ............................................................................................................................1.0 ° maximum
Weight ........................................................................................................................Approximately 19 G
Terminals................................................................................................................Solder lugs or PC pins
Soldering Condition
TOLERANCES: EXCEPT WHERE NOTED
.51
(.02),
.13
(.005)
DECIMALS: .XX
.XXX
FRACTIONS: 1/64
MM
DIMENSIONS:
(IN.)
SHAFT & BUSHING CONFIGURATIONS
Manual Soldering..............................................................96.±Snꢁ3.0Agꢁ0.±Cu solid wire or no-clean
rosin cored wire; 370 °C (700 °F) max. for 3 seconds
(Bushing - DxL, Shaft - D)
(-1) Plastic Bushing (3ꢁ8 ” x ±ꢁ16 ”)
and Shaft (.2480 + .001, - .002)
Wave Soldering ........................96.±Snꢁ3.0Agꢁ0.±Cu solder with no-clean flux; 260 °C (±00 °F) max.
for ± seconds
(-2) Metal Bushing (3/8 x 5/16 )
and Shaft (.2497 + .0000, - .0009)
(-3) Sealed, Plastic Bushing (3ꢁ8 ” x ±ꢁ16 ”)
and Shaft (.2480 + .001, - .002)
Wash processes......................................................................................................Not recommended
Marking......................................................Manufacturer’s name and part number, resistance value and
tolerance, linearity tolerance, wiring diagram, and date code.
Ganging (Multiple Section Potentiometers) .....................................................................1 cup maximum
Hardware...........................One lockwasher and one mounting nut is shipped with each potentiometer.
(-4) Sealed, Metal Bushing (3ꢁ8 ” x ±ꢁ16 ”)
and Shaft (.2497 + .0000, - .0009)
(-±) Metric, Plastic Bushing (9 mm x 7.94 mm)
and Shaft (6 mm + 0, - .076 mm)
NOTE: For Anti-rotation pin add 91 after configuration dash number. Example: -2 becomes -291 to add AR pin.
(-6) Metric, Metal Bushing (9 mm x 7.94 mm)
and Shaft (6 mm + 0, - .023 mm)
Recommended Part Numbers
(-7) Metric, Sealed, Plastic Bushing (9 mm x
7.94 mm) and Shaft (6 mm + 0, - .076 mm)
(-8) Metric, Sealed, Metal Bushing (9 mm x
7.94 mm) and Shaft (6 mm + 0, - .023 mm)
Resistance
Resolution
(Printed Circuit)
(Solder Lug)
(Solder Lug)
(Ω)
(%)
BOLDFACE LISTINGS ARE IN STOCK AND READILY
AVAILABLE THROUGH DISTRIBUTION.
3±90P-2-102L
3±90P-2-202L
3±90P-2-±02L
3±90P-2-103L
3±90P-2-203L
3±90P-2-±03L
3±90P-2-104L
3590S-2-102L
3590S-2-202L
3590S-2-502L
3590S-2-103L
3590S-2-203L
3590S-2-503L
3590S-2-104L
3±90S-1-102L
3±90S-1-202L
3±90S-1-±02L
3±90S-1-103L
3±90S-1-203L
3±90S-1-±03L
3±90S-1-104L
1,000
2,000
5,000
10,000
20,000
50,000
100,000
.029
.023
.025
.020
.019
.013
.009
FOR OTHER OPTIONS CONSULT FACTORY.
TERMINALS:
L = RoHS COMPLIANT
BLANK = STANDARD
REV. 06/06
*RoHS Directive 2002/95/EC Jan 27 2003 including Annex
Specifications are subject to change without notice.
Customers should verify actual device performance in their specific applications.
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
