Datasheet > 314488-1

314488-1

更新时间： 2024-09-19 01:22:31

品牌	Logo	应用领域
MACOM		/
页数	文件大小	规格书
5页	224K
描述
Reasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY.

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

314488-1 数据手册

Figure 1

Features of the head (shown in Figure 1) and

functions are as follows:

Feed–Through Head Assembly 58442–1 is used to

terminate discrete wires onto MTA–100 Receptacles

640620–[ ] (for wire size 22 AWG) and Receptacles

640623–[ ] (for wire size 28 AWG) with a maximum

insulation diameter of 1.52 mm [.060 in.]. Read these

instructions thoroughly before using the head.

Wire inserter—forces the wire into the two slotted

beams of the contact. Note that it provides support for

the contact beams when applying insertion force on

the wire.

Rod inserter adjuster—is a piston for the wire inserter

and regulates wire inserter travel.

The head must be mounted onto one of the following

tools (for operating procedure for the tool, refer to the

instructions packaged with the tool):

Feed slide—automatically positions the receptacle

after each termination.

— Pistol Grip Manual Handle Assembly 58074–1

(408–6790)

Locating pawl—aligns the receptacle for insertion,

and retains it during termination. The locating pawl is

sometimes referred to as the “anti–backup pawl.”

— Electric Power Unit 931800–1 (409–5746)

— Pistol Grip Pneumatic Handle Assembly

58075–1 (408–6789)

Insert housing—holds the receptacle in place in

relation to the wires.

— Pneumatic Power Bench Assembly 58338–1

(408–9393)

Wire subassembly retainer—holds the wires in place

in relation to the receptacle.

Reasons for reissue of this instruction sheet are

provided in Section 8, REVISION SUMMARY.

1. Make a termination according to Section 4,

Steps 1 through 6. If the receptacle cannot be

inserted into the head, or if the receptacle is too

loose in the head, adjust the insert housing

according to Paragraph 3.2.

The head serves as a guide and support for the

receptacle during termination.

12 3 4 5

中文翻译

下载PDF

与314488-1相关器件

型号	品牌	获取价格	描述	数据表
314489--1	MACOM	获取价格	Feed- Through Head Assembly
314500	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses
314500000	ITT	获取价格	Thumb/Pushwheel Switch, Binary Coded Decimal, On-on, 10 Positions, 0.1A, 28VDC, Solder Lug
314500P	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses
314-502-22-01	MARL	获取价格	Single Color LED, Red, Water Clear, 8.4mm, 2 PIN
314-503-04-01	MARL	获取价格	Single Color LED, Red, Water Clear, 8.4mm, PLASTIC, 2 PIN
314-503-20	MARL	获取价格	Single Color LED, Red, Water Clear, 8.4mm, PLASTIC, 2 PIN
314-503-20-01	MARL	获取价格	Single Color LED, Red, Water Clear, 8.4mm, PLASTIC, 2 PIN
314-506-04	MARL	获取价格	Single Color LED, Orange, Water Clear, 8.4mm, PLASTIC, 2 PIN
314-506-04-01	MARL	获取价格	Single Color LED, Orange, Water Clear, 8.4mm, PLASTIC, 2 PIN