Datasheet > 312144-1

312144-1

更新时间： 2024-09-27 00:59:51

品牌	Logo	应用领域
泰科 - TE		/
页数	文件大小	规格书
3页	306K
描述
Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools.

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

312144-1 数据手册

Instruction Sheet

Pistol Grip Manual Handle Assembly

58074-1

408-6790

28 MAR 11 Rev C

PROPER USE GUIDELINES

Cumulative Trauma Disorders can result from the prolonged use of manually powered hand tools. Hand tools are intended for occasional use

and low volume applications. A wide selection of powered application equipment for extended-use, production operations is available.

For details concerning the termination procedure,

refer to the instructions included with the head.

NOTE

Key (Visible on

this Side)

Body

Ratchet

Pawl

3. HEAD INSTALLATION AND REMOVAL

1. Position the blade tip of a screwdriver between

the shoulder of the key and the handle assembly

body. Pry and remove the key.

2. Squeeze the cam handle until the ratchet

releases, then allow it to FULLY open.

3. Insert the terminating head into the head

entrance until the head bottoms. See Figure 2.

Make sure that the head is FULLY bottomed in the

handle assembly before re-inserting the key.

NOTE

Cam

Handle

Head

Figure 1

1. INTRODUCTION

Pistol Grip Manual Handle Assembly 58074-1 accepts

interchangeable terminating heads that terminate

wires to connectors. To ensure accurate termination of

wires, setup adjustments, and head maintenance,

refer to the instructions packaged with the terminating

head.

Head Entrance

Key Removed

Dimensions in this instruction sheet are in metric

units [with U.S. customary units in brackets].

NOTE

Figures are not drawn to scale.

Reasons for reissue of this instruction sheet are

provided in Section 6, REVISION SUMMARY.

Cam Handle Fully Opened

2. DESCRIPTION

The manual handle assembly features a cam handle,

a key, and a ratchet pawl. The head is secured in the

handle assembly with the key.

Figure 2

4. Re-insert the key to retain the head. Apply

enough pressure to fully insert the key into the

manual assembly.

After the head is properly installed in the handle

assembly, the cam handle actuates the terminating

mechanism inside the head. The ratchet pawl is used

to release the handle before it is fully closed.

5. To remove the head, remove the key and pull the

head out of the handle assembly.

1 of 3

PRODUCT INFORMATION 1-800-522-6752

For latest revision and Regional Customer Service,

visit our website at www.te.com

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks.

LOC B

*Trademark. Other logos, product and/or Company names may be trademarks of their respective owners.

12 3

中文翻译

下载PDF

与312144-1相关器件

型号	品牌	获取价格	描述	数据表
312144-2	TE	获取价格	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand too
312145-1	TE	获取价格	Cumulative Trauma Disorders can result from the prolonged use of manually powered hand too
312147-1	MACOM	获取价格	Terminating Head 58247- 1 For MTA- 156 Receptacle Connectors Using Discrete Wire
312147-1	TE	获取价格	Read these and all referenced instructions thoroughly before using the head.
312147--1	MACOM	获取价格	Feed- Through Head Assembly
312148-1	MACOM	获取价格	Terminating Head 58247- 1 For MTA- 156 Receptacle Connectors Using Discrete Wire
312148-1	TE	获取价格	Read these and all referenced instructions thoroughly before using the head.
312148--1	MACOM	获取价格	Feed- Through Head Assembly
312148--2	MACOM	获取价格	Reasons for reissue of this instruction sheet are provided in Section 8, REVISION SUMMARY.
312148-4	TE	获取价格	Reason for revision is given in Section 8, REVISION SUMMARY.

与312144-1相关文章

塔塔电子与力积电达成技术转让协议，携手建设印度首座晶圆厂
2024-09-29

9
英特尔震撼发布：128核心256线程的至强6性能核处理器
2024-09-29

8
SK海力士量产12层HBM3E，容量高达36GB
2024-09-27

12
意法半导体传感器驱动Sphere，开启沉浸式电影新时代
2024-09-27

19

产品中心

服务支持

精选活动

关于我们

帮助中心

312144-1

312144-1 数据手册

与312144-1相关器件

与312144-1相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

312144-1

312144-1 数据手册

与312144-1相关器件

与312144-1相关文章

您还可以找

您在本页遇到什么问题？