30KP33 thru 30KP400CA, e3
30kW Transient Voltage Suppressor
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
These Microsemi 30 kW Transient Voltage Suppressors (TVSs) are
designed for applications requiring protection of voltage-sensitive electronic
devices that may be damaged by harsh or severe voltage transients
including lightning per IEC61000-4-5 and class levels with various source
impedances described herein. This series is available in 33 to 400 volt
standoff voltages (VWM) in both unidirectional and bi-directional with either
5% or 10% tolerances of the Breakdown Voltage (VBR). Microsemi also
offers numerous other TVS products to meet higher or lower power
demands and special applications.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
Available in both Unidirectional and Bidirectional
construction (Bidirectional with C or CA suffix)
•
•
Protection from switching transients and induced RF
Protection from ESD, and EFT per IEC 61000-4-2 and
IEC 61000-4-4
•
•
Selections for 33 to 400 volt standoff voltages VWM
Suppresses transients up to 30 kW @ 10/1000 µs and
200 kW @ 8/20 µs (see Figure 1)
•
Secondary lightning protection per IEC61000-4-5 with
42 Ohms source impedance:
Class 1,2,3,4: 30KP33A - 30KP400A or CA
•
•
Fast response
Class 5: 30KP33A - 30KP400A or CA (short distance)
Class 5: 30KP33A - 30KP220A or CA (long distance)
Optional 100% screening for avionics grade is
available by adding MA prefix to part number for
added 100% temperature cycle -55oC to +125oC
(10X) as well as surge (3X) and 24 hours HTRB with
post test VZ & IR (in the operating direction for
unidirectional or both directions for bidirectional)
•
•
Secondary lightning protection per IEC61000-4-5 with
12 Ohms source impedance:
Class 1,2, 3: 30KP33A to 30KP400A or CA
Class 4: 30KP33A to 30KP220A or CA
•
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, and JANS are
available by adding MQ, MX, MV, or MSP prefixes
respectively to part numbers.
Secondary lightning protection per IEC61000-4-5 with
2 Ohms source impedance:
Class 2: 30KP33A to 30KP400A or CA
Class 3: 30KP33 to 30KP220A or CA
Class 4: 30KP33 to 30KP110A or CA
•
•
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
RoHS Compliant devices available by adding “e3” suffix
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
Peak Pulse Power dissipation at 25ºC: 30,000 watts
•
•
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
at 10/1000 μs (also see Figures 1 and 2)
•
•
Impulse repetition rate (duty factor): 0.05%
FINISH: Tin-Lead or RoHS compliant annealed
matte-Tin plating readily solderable per MIL-STD-
750, method 2026
t
clamping (0 volts to V(BR) min.): < 100 ps theoretical for
unidirectional and < 5 ns for bidirectional
Operating & Storage temperature: -65ºC to +150ºC
Thermal resistance: 17.5ºC/W junction to lead, or
77.5ºC/W junction to ambient when mounted on FR4
PC board with 4 mm2 copper pads (1oz) and track
width 1 mm, length 25 mm
•
•
MARKING: Body marked with part number
•
•
POLARITY: Band denotes cathode. Bidirectional not
marked for polarity
•
•
WEIGHT: 1.7 grams (approximate)
TAPE & REEL option: Standard per EIA-296 for axial
package (add “TR” suffix to part number)
•
Steady-State Power dissipation: 7 watts at TL =
27.5oC, or 1.61 watts at TA = 25ºC when mounted on
FR4 PC board described for thermal resistance
•
See package dimension on last page
•
•
Forward Surge: 250 Amps 8.3 ms half-sine wave for
unidirectional devices only
Solder temperatures: 260 ºC for 10 s (maximum)
Copyright © 2007
8-21-2007 REV K
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
