DATASHEET
SERIALLY PROGRAMMABLE CLOCK SOURCE
ICS307-01/-02
Description
Features
The ICS307-01 and ICS307-02 are versatile serially
programmable clock sources which take up very little
board space. They can generate any frequency from 6
to 200 MHz and have a second configurable output.
The outputs can be reprogrammed on the fly and will
lock to a new frequency in 10 ms or less. Smooth
transitions (in which the clock duty cycle remains near
50%) are guaranteed if the output divider is not
changed.
• Packaged in 16-pin (150 mil wide) SOIC
• ICS307M-02 and -02I available in Pb (lead) free
package
• Highly accurate frequency generation
• Serially programmable: user determines the output
frequency via a 3 wire interface
• Eliminates need for custom quartz
• Input crystal frequency of 5 - 27 MHz
• Output clock frequencies up to 200 MHz
• Power down tri-state mode
The devices includes a PDTS pin which tri-states the
output clocks and powers down the entire chip.
The ICS307-02 features a default clock output at
start-up and is recommended for all new designs.
• Very low jitter
• Operating voltage of 3.3 V or 5 V
• 25 mA drive capability at TTL levels
• Industrial temperature version available
NOTE: EOL for non-green parts to occur on 5/13/10
per PDN U-09-01
This product is intended for clock generation. It has low
output jitter (variation in the output period), but input to
output skew and jitter are not defined nor guaranteed.
For applications which require defined input to output
skew, use the ICS527-01.
Block Diagram
VDD
TTL
V8:V0
9
2
3
2
SCLK
DATA
C1:C0
S2:S0
F1:F0
Shift
Register
STROBE
VCO
Divider
7
R6:R7
CLK1
X1/ICLK
Phase Comparator,
Charge Pump, and
Loop Filter
Crystal
Oscillator
Reference
Divider
Output
Divider
VCO
PDTS
CLK2
Crystal or
clock input
Function
Select
X2
3
3
Optional crystal capacitors
S2:S0
F1:F0
GND
IDT™ / ICS™ SERIALLY PROGRAMMABLE CLOCK SOURCE
1
ICS307-01/-02 REV H 090209