5秒后页面跳转
30069 PDF预览

30069

更新时间: 2022-12-18 10:48:48
品牌 Logo 应用领域
GAMEWELL-FCI /
页数 文件大小 规格书
2页 60K
描述
Constant-Duty Power Supply

30069 数据手册

 浏览型号30069的Datasheet PDF文件第2页 
CDP8  
Description  
Constant-Duty Power Supply  
The Gamewell-FCI CDP8 Constant-Duty Power Supply is  
a regulated, power-limited, 24 VDC, 8.0 amp. power supply  
which can be used anywhere a constant 24 VDC source is  
required. The CDP8 is suited and UL-Listed for fire alarm,  
access control, and general power supply applications.  
The Gamewell-FCI CDP8 provides four (4) power-limited,  
24 VDC, 3.0 amp. outputs. Each output can be individually  
configured to shed its load (turn off) during a power failure  
to extend available standby battery power for designated  
critical circuits.  
Each output circuit is monitored for overload or shorted  
conditions, with the trouble condition indicated by a specific  
circuit trouble LED and activation of the common trouble  
relay. Overloaded circuits will automatically restore when  
the overload is removed.  
CDP8  
Engineer’s Specifications  
The power supply shall provide four (4) output circuits  
capable of up to 3.0 amp. continuous 24 VDC each to a  
maximum of 8.0 amps. total. The output voltage shall be  
regulated and power-limited. Each output circuit shall be  
configurable to shed its load with the loss of the primary AC  
source. The Constant-Duty Power Supply shall include an  
internal battery charger with charging capacity of 26 AH. It  
shall also be operational from an externally charged bat-  
tery. Operational troubles shall be indicated by seven LEDs  
and a common trouble Form-C relay. The supply shall also  
have a delayed AC Fail relay. The Constant-Duty Power  
Supply shall be Gamewell-FCI, model CDP8.  
Features  
Four (4) configurable monitored outputs  
8.0 A, 24 VDC, fully regulated full-load output  
(power-limited)  
Seven (7) trouble and status LEDs  
Common trouble Form-C relay  
Isolated AC Fail Form-C relay  
Selectable AC Fail notification relay  
Ground fault detection  
26.0 A battery-charger capability  
Selectable internal battery charger disable  
Selectable internal ground fault detection disable  
Selectable load shedding on AC Fail per output  
Specifications  
Primary Input Power: 120 VAC, 50/60 Hz, 3.5 A  
or 220 V, 1.9 A, jumper-selectable.  
Secondary Power:  
Battery Charging  
Capacity:  
24-volt: two 7 – 26 AH batteries  
Up to 26 AH batteries  
Total Output Power: 8.0 A maximum  
Standby Current:  
Output Ratings:  
0.03 A  
24 VDC fully regulated, 3.0 A max-  
imum per circuit, 8.0 A total  
An ISO 9000-2000 Company  
Cabinet Dimensions: 18.0" H x 12.5" W x 4.5" D  
SIGNALING  
(45.72 H x 31.75 W x 11.43 D cm)  
S8240 7315-1288:163  
GAMEWELL-FCI  
12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118  
Specifications are for information only, are not intended for installation purposes, and are subject to change without notice. No responsibility is assumed by Gamewell-FCI for their use.  
©2007 by Honeywell International Inc. All rights reserved.  
www.gamewell-fci.com  
CS-2283 Rev. a page 1 of 2  

与30069相关器件

型号 品牌 描述 获取价格 数据表
3006-90 APITECH Variable Attenuator, 0MHz Min, 1250MHz Max,

获取价格

30069-0211 MOLEX 4.20mm Pitch, Mini-Fit® TPA Header, Dual Row

获取价格

30069-02A1 MOLEX Mini-Fit® TPA Header, 4.20mm Pitch, Dual Row

获取价格

30069-02C1 MOLEX 4.20mm (.165) Pitch Mini-Fit TPA™ Header, Dua

获取价格

30069-02C2 MOLEX Mini-Fit® TPA Header, 4.20mm Pitch, Dual Row

获取价格

3006904 PHOENIX Modular Terminal Block, 57A, 16mm2

获取价格