2A140MC
Ni-MH
Size : AA
Specification
d
Type: Rechargeable nickel metal hydride battery
h
Dimension
D.......................................................... 14.0 0.2mm
d........................................................... 5.0 0.2 mm
H.......................................................... 50.0 0.5 mm
h........................................................... 1.5 0.5 mm
H
Nominal Voltage................................................. 1.2V
(with jacket)
D
Weight................................................................ 27g
Volts
1.6
Internal resistance
1.4
1.2
1
At 1000Hz..................................................... ~30 m
0.1C
Capacity
Rated capacity..............................................1400mAh
1) At 0.2C discharge......100~105%of rated capacity.
2) At 0.5C discharge..........95~98%of rated capacity.
3) At 1C discharge.............90~95%of rated capacity.
0.8
0.6
0.4
0.2
0
0
20
40
60
80
Capacity %
100
120
140
160
1) Slow charge 140mA x 15hrs. (0-45 C)
To avoid overcharge, a timer is used to terminate the
charging after 150% capacity input.
0.1C Rate Charging Curves
Volts
1.6
0.2C
0.5C
2) Normal charge 700mA x 2-3hrs. (10-45 C)
To avoid overcharge, a timer is used to terminate the
charging after 150% capacity input. A joint use of
dT or - V cut off is required. For dT control, a
maximum allowable temperature rise is 1 C/min. Or
if - V control is used, the maximum allowable
voltage decrease is 10 mV/cell. In addition, a
temperature cut off (TCO) device, i.e. thermostat,
with cut off temperature at 55 C must be used for
safety purpose.
1.4
1.2
1
0.8
0.6
0.4
0.2
0
0
20
40
60
80
100
120
140
Capacity %
0.2C/0.5C Rate Charging Curve
3) Quickcharge
Volts
1.6
Quickchargeoverrate0.5CAisnotrecommended.
1.4
1.2
1
Storage:
1)StorageTemperature........................-10 Cto45 C
2) Remain trace of charged capacity for prolonged
period of storage.
0.5C
0.2C
0.8
1C
0.6
0.4
0.2
0
3) Slow recharging of stored batteries for every 3
months.
0
20
40
60
Capacity %
80
100
120
Remark: Weight and internal impedence are for reference only.
0.2C / 0.5C / 1C Rate Discharging Curves