DUAL-IN-LINE SOCKETS
SERIES 296, 299, 594 • DISPLAY SOCKETS
• Series 296, 299 and 594 display sockets are
used to mount dot matrix and 7-segment LED
displays at the edge of and perpendicular to a
printed circuit board. This positions the display
directly behind the translucent front panel of
the equipment
7,62
2,54
• Series 299 & 594 are through-hole mount and
12,7
can be wave or intrusive reflow soldered
• Series 296 is surface mount and can be
supplied on carrier tape for automated “pick ‘n
3,6
place”assembly
1,27
• Hi-Rel, 4-finger BeCu #30 contact is rated at
3 amps. See page 253 for details
0,64 DIA.
6,35
2,54
• See also page 129 for Right Angle DIP Sockets
5,08
17,78
• Insulators are high temp. Nylon 46, suitable for
all soldering processes including “lead-free”
FIG. 1
• For Electrical, Mechanical and Environmental
Data, see page 264 for details
11,0
9,91
2,0
6,35
ORDERING INFORMATION
1,5
Series 299...001
Series 296...691
Series 296...692
10 Pin Vertical Display Socket
0,64 DIA.
8,2
Discrete Sockets
5,3
0,5
FIG. 1
FIG. 2
FIG. 3
299ꢀ99ꢀ210ꢀ12ꢀ001800
1,6
Plating Code
1,1
1,6
2,54
1,3
10 Pin Horizontal Display Socket
0,64
2,79
5,08
Discrete Sockets
2,54
296ꢀXXꢀ010ꢀ30ꢀ691800
2,29
2,29
Plating Code
10 Pin Horizontal Display Socket
1,1
2,0
Supplied on 24mm wide carrier tape per EIA-481: 450 per 330mm reel
296ꢀXXꢀ010ꢀ30ꢀ692800
FOOTPRINT
FIG. 2
Plating Code
20,96
17,78
4,45
Series 594...007
20 Pin Vertical Display Socket
1,91
2,5
1,27
1,57
2,79
Discrete Sockets
594ꢀXXꢀ020ꢀ01ꢀ007032
10,0
2,54
13,81
3,43
0,51
Plating Code
1,27
0,64 DIA.
1,27
7,62
RoHS-2
XX=Plating Code
See Below
2011/65/EU
5,0
10,0
15,0
2,97
19,05
99
44
SPECIFY PLATING CODE XX=
Sleeve (Pin)
5,08μm Sn/Pb
5,08μm Sn
FIG. 3
5,08μm Sn/Pb
5,08μm Sn
Contact (Clip)
Mill-Max Mfg. Corp. • 190 Pine Hollow Road, P.O. Box 300, Oyster Bay, NY 11771 • 516-922-6000 • Fax: 516-922-9253 • www.mill-max.com