Web
page
Sample
& buy
Tools &
software
Support
& FAQ
Document 404-1
™
Low Profile Mini Spring Inductors
• Only 2 mm tall
• High Q over a wide range of frequencies
• Low DCR and excellent current handling capability
AEC
+
Q200 85°C
Designer’s Kit C394 contains 10 samples each 5% part
Designer’s Kit C394-2 contains 10 samples each 2% part
Terminations RoHS compliant tin-silver over copper. Other termina-
tions available at additional cost.
Weight 48 – 130 g
Ambient temperature –40°C to +125°C with Irms current
Maximum part temperature +140°C (ambient + temp rise).
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
0.22 per billion hours / 4.545E+09 hours, calculated per Telcordia SR-332
Packaging 1000/7″ reel; 3500/13″ reel Plastic tape: 2 mm wide,
0.23 mm thick, 8 mm pocket spacing, 2.2 mm pocket depth
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Part
Inductance2
(nH)
Percent
tol3
Q2
min
SRFmin4
(GHz)
DCRmax5
(mOhm)
Irms6
(A)
Wt
(mg)
number1
Turns
1508-5N5_L_
1508-9N0_L_
1508-13N_L_
3
4
5
5.5
9.0
13.0
5,2
5,2
5,2
115
120
100
5.0
4.0
3.0
2.6
3.4
3.9
4.0
4.0
4.0
52
65
78
2508-16N_L_
2508-18N_L_
2508-23N_L_
2508-27N_L_
7
8
9
16.0
18.0
23.0
27.0
5,2
5,2
5,2
5,2
110
110
110
110
3.0
2.9
2.6
2.3
5.2
6.0
6.8
7.9
4.0
4.0
4.0
4.0
110
118
133
147
10
1. Specify tolerance, termination and packaging codes:
2. L and Q measured at 250 MHz, 0.1 Vrms, 0 A using an Agilent/HP
4291A impedance analyzer with an Agilent/HP 16193A test fixture.
3. Tolerances in bold are stocked for immediate shipment.
4. SRF measured using an Agilent/HP 8753 network analyzer and a Coil-
craft SMD-D test fixture.
2508-27NJLC
Tolerance: G= 2% J = 5%
Termination: L = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order: T = RoHS tin-silver-copper
5. DCR measured using a micro-ohmmeter.
(95.5/4/0.5) or S = non-RoHS tin-lead (63/37).
6. Current that causes a 15°C temperature rise from 25°C ambient.This
information is for reference only and does not represent absolute
maximum ratings.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (1000 parts per full reel). Quantities less than
full reel available: in tape (not machine ready) or
with leader and trailer ($25 charge).
B = Less than full reel. In an effort to simplify our part
numbering system, Coilcraft is eliminating the need
for multiple packaging codes. When ordering, simply
change the last letter of your part number from B to C.
D = 13″ machine-ready reel. EIA-481 embossed plastic tape.
Factory order only, not stocked (3500 parts per full reel).
Document 404-1 Revised 05/13/21
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2021
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.