24VL014H
1K I2C™ Serial EEPROM with Half-Array Write-Protect
Device Selection Table
Description:
Part Number
VCC Range
1.5 to 3.6V
Max Clock
The Microchip Technology Inc. 24VL014H is a 1 Kbit
Serial Electrically Erasable PROM with operation
down to 1.5V. The device is organized as a single block
of 128 x 8-bit memory with a 2-wire serial interface.
Low-current design permits operation with maximum
standby and active currents of only 1 μA and 400 μA,
respectively. The device has a page write capability for
up to 16 bytes of data. Functional address lines allow
the connection of up to eight 24VL014H devices on the
same bus for up to 8 Kbits of contiguous EEPROM
memory. The device is available in the standard 8-pin
PDIP, 8-pin SOIC (150 mil), TSSOP, 2x3 TDFN and
MSOP packages.
24VL014H
400 kHz(1)
Note 1: 100 kHz for VCC < 1.8V
Features:
• Single-Supply with Operation Down to 1.5V
• Low-Power CMOS Technology:
- 400 μA active current, maximum
- 1 μA standby current, maximum
• 2-Wire Serial Interface Bus, I2C™ Compatible
• Schmitt Trigger Inputs for Noise Suppression
• Output Slope Control to Eliminate Ground Bounce
• 100 kHz and 400 kHz Compatibility
Block Diagram
WP
A0 A1 A2
HV Generator
• Page Write Buffer for up to 16 Bytes
• Self-Timed Write Cycle (including Auto-Erase)
I/O
Control
Logic
Memory
Control
Logic
• Hardware Write Protection for Half Array
(40h-7Fh)
EEPROM
Array
XDEC
• Cascadable up to Eight Devices
• More than 1 Million Erase/Write Cycles
• ESD Protection > 4,000V
SDA
SCL
Write-Protect
Circuitry
• Data Retention > 200 Years
VCC
VSS
• Factory Programming (QTP) Available
YDEC
• 8-pin PDIP, SOIC, TSSOP, TDFN and MSOP
Packages
Sense Amp.
R/W Control
• Temperature Range:
- -20°C to +85°C
• Pb-Free and RoHS Compliant
Package Types
SOIC, TSSOP
PDIP, MSOP
A0
1
8
VCC
1
2
3
4
8
7
6
5
A0
A1
VCC
WP
A1
A2
2
3
4
7
6
5
WP
SCL
SDA
A2
SCL
SDA
VSS
VSS
TDFN
1
VCC
WP
A0
8
7
6
5
2
3
4
A1
SCL
SDA
A2
VSS
© 2008 Microchip Technology Inc.
DS22116A-page 1