HARTING Ha-VIS eCon Switches
3 to 16 Ethernet ports RJ45 and SC
Ha-VIS eCon 3000
Fast Ethernet Basic
Unmanaged Plug & Play Ethernet switches for DIN rail assembly in control
cabinets
Commercial Temp.: 0 °C ... +55 °C / Industrial Temp.: -40 °C ... +70 °C
Energy
Efficient
Ethernet
■ Fast Ethernet Non-Blocking Switch architecture according to IEEE 802.3
■ Variants with industrial temperature range of -40°C ... +70 °C
■ Wide range voltage supply 24/48 VDC
■ Surge protection and reverse polarity protection
■ Minimum energy consumption due to Energy-Efficient Ethernet
■ Optimised DIN rail bracket
Target markets
Machinery &
Robotics
Industrial network
infrastructures
Automation technology
Transportation
Wind Energy
Solar Energy
Shipbuilding
General description
The Ha-VIS eCon 3000 Fast Ethernet family of unmanaged Ethernet
switches is equipped with up to 16 Fast Ethernet ports and allow for cost-
efficient and quick expansion and/or reconstruction of network
infrastructures. The slender design of the switches enables an extremely
high packing density on the DIN rail. The selection includes various
combinations of variants with RJ45 and fibre optic ports. Automatic
detection of the transmission rate (auto-negotiation) and of the wiring of the
twisted pair data cable (autopolarity and auto-MDI(X)) allow for simple plug
& play. All variants are available with the temperature ranges "Industrial"
and "Commercial".
Technical characteristics
Switch Features
Ethernet Ports 10BASE-Te / 100BASE-TX EEE
Connection type
Auto-negotiation
Auto-polarity
RJ45
Yes
Yes
Enclosures width
Number of ports
Switching technology
Supported standards
Frame Size
MAC table size
Packet buffer size
Non-blocking
Quality of service
Energy-Efficient Ethernet
PROFINET compatible
EthernetIP compatible
25 mm
3, 5, 6, 7, 8
38 mm
9, 10
38 mm
16
Store and Forward
IEEE 802.3
1632 bytes
2k entries
1 Mbit
Auto-MDI(X)
Yes
1522 bytes
1k entries
448 kbit
2000 bytes
8k entries
2 Mbit
Transfer conditions
Transfer speed
Transfer length
Twisted Pair
10 / 100 Mbit/s
100 m (twisted pair, Cat 5)
Yes
Yes
Yes
Yes
Ethernet Ports 100BASE-FX
Type of fibre
Multimode (MM)
Singlemode (SM)
SC Duplex
Connection type
Transfer conditions
Wavelength
Transfer speed
Transfer length
Output power
Input sensitivity
Yes
FO
1310 nm
100 Mbit/s
Voltage supply
2 km
-20 dBm ... -14 dBm
≤ -30 dBm
15 km
-15 dBm ... -8 dBm
≤ -32 dBm
Nominal voltage
Permissible voltage range
Surge protection
Reverse polarity proof
Starting current
24 VDC
48 VDC
9 VDC ... 60 VDC
Yes
Yes
Ambient conditions
1.6 A
3.2 A
Yes (12 A for <=8 ports)/
(2 A for >8 ports)
Commercial temperature range
Industrial temperature range
Storage temperature range
Relative humidity (operation)
Relative humidity
(storage and transport)
0 °C ... +55 °C
-40 °C ... +70 °C
-40 °C ... +85 °C
Overcurrent protection at input
Max. power consumption @ 24 VDC
Cross-section / Wire gauge
Connection type
1.80 W ... 6.72 W
0.08 mm² ... 2.5 mm² (28 AWG ... 12 AWG)
3-pole, pluggable screwed contact
+ / - /
0 % ... 95 % (not-condensing)
0 % ... 95 % (not-condensing)
2000 m (795 hPa)
Pinout
Supply circuit (acc. to 60950)
SELV (circuit breaker 10 A)
Air pressure (operation)
HARTING Technology Group
P.O.Box 1473, D-32325 Espelkamp
Wilhelm-Harting-Straße 1, D-32325 Espelkamp, Germany
Note: We reserve the right to make technical changes to the products and to the content of this
document at any time without prior notification. The HARTING Technologiegruppe does not accept
any responsibility for possible errors or incompletions in this document. We reserve all the rights to
this document and the topics and illustrations contained within it. Copying, disclosure to third parties
or use of its content - even partially - is forbidden without the prior written consent of the HARTING
Technologiegruppe.
ICPN-Service@harting.com | Service hotline: +49 5772 47-9479
Fax: +49 5772 47-495 | www.HARTING.com/de/ethernet-switches