High Pulse Currents - High voltage
FEATURES
Power Semiconductor Circuits – SCR Commutation –
Ballasts Controls – Switching Power Supplies
APPLICATIONS
Operating Temperature Range
Capacitance Tolerance
-55°C to +105°C
+10% at 1 kHz, 25°C
+5% optional
WVDC
VAC
630
400
1000
630
1600
650
2000
700
AC voltage (50/60 Hz)
DC: For T>+85°C , The voltage must be decreased by 1.5% per °C
AC: For T> +75°C, The voltage must be decreased by 1.75% per °C
Frequency
C<0.1uF 0.1uF<C<1uF
C>1uF
(kHz)
Dissipation Factor (MAX)
25°C
1
10
100
0.04%
0.05%
0.16%
0.04%
0.06%
-
0.05%
-
-
Capacitance
<0.33μF
>0.33μF
Insulation Resistance
100000 MΩ
Insulation Resistance
@25°C (<70% RH)for 1 minute at
100VDC applied
30000 MΩxμF
Self Inductance
Capacitance Drift Factor
<1 nano-Henry per mm of lead spacing
<0.5% after 2 years at 40°C
2000 Hours, +85C with 125% of rated voltage
Capacitance Change
<1% of initially measured value
<0.001 at 10kHz and 25°C for C<1uF
<0.001 at 1kHz and 25°C for C>1uF
>50% of maximum specified value
1 Fit
Load Life
Dissipation Factor
Insulation Resistance
Reliability
(0.5xRated Voltage,
40°C)
Capacitance Change
Dissipation Factor
<10% of initially measured value
<200% of initially specified value
1 FIT=1 failure/1 billion
component hours
Insulation Resistance
>50% of maximum specified value
56 days at40°C with 90 to 95%RH, +40°C and no voltage applied
Capacitance Change
Dissipation Factor
<5% of initially measured value
<0.005 at 1kHz and 25°C
Damp Heat test
Insulation Resistance
>50% of maximum specified value
Self Inductance
Capacitance Drift Factor
Capacitance Temperature
Coefficient
<1 nano-Henry per mm of lead spacing
<0.5% after 2 years at 40°C
-200 ppm/°C, +100ppm/°C
Terminal to Terminal
160% of rated VDC applied for 2 Seconds and 25°C
Polypropylene
Dielectric Strength
Dielectric
Construction
Metallized film
Coating
Leads
Flame Retardant plastic box (UL 94V-1) with epoxy resin fill (UL94V0)
Lead free tinned copper leads
Special Order Options
Sep-21