CALIFORNIA MICRO DEVICES
210R
THIN FILM RESISTOR SERIES
California Micro Devices 210R Series multi-terminal resistor chip offers the hybrid designer a component that provides a
wide range of resistance values on a single chip. Bonding pads segment the total resistance into five single elements of
resistance and seven 5X elements of resistance enabling the combination to cover the resistance range from 800 ohms to
240K ohms.
ELECTRICAL SPECIFICATIONS
Parameter
Test Condition
0 to -250ppm/°C
TCR
-55°C to +125°C
Max
Max
Max
Max
Max
Max
Max
Max
Min
Operating Voltage
Package Power Rating
Power Rating (per resistor)
-55°C to +125°C
100Vdc
250mw
@ 70°C (Derate linearly to zero @ 150°C)
Method 107 MIL-STD-202F
100 Hrs @ 150°C Amb i e n t
Method 106 MIL-STD-202F
Method 108 MIL-STD-202F (125°C/1 0 0 0 h r)
Method 308 MIL-STD-202F
@ 25°C
Thermal Shock
High Temperature Exposure
Moisture Resistance
Life
Noise
Insulation Resistance
±0.25% @ ∆R
±0.25% ∆R
±0.5% ∆R
±0.5% ∆R
-20dB
1 × 1012
Ω
VALUES
PAD 1
Total
Nominal/Single
Part Number
Resistance
Element of Resistance
PAD 13
PAD 8
210R 8000X
210R 2400X
210R 8001X
210R 8002X
210R 1602X
210R 2403X
800Ω
20
60
200
2000
4000
6000
2400Ω
8000Ω
80000Ω
160000Ω
240000Ω
Formats
Die Size:
30±3 mils square
Bonding Pads:
4x4 mils typical
MECHANICAL SPECIFICATIONS
Substrate Silicon 10±2 mils thick
100,000Å thick, min
Isolation Layer
Backing
Si02
Lapped (gold optional)
Metalization
Aluminum 10,000Å thick, min
(15,000Å gold optional)
PACKAGING
Two inch square trays of 400 chips maximum.
NOTES
1. The tolerance applies to the total resistance value only.
2. Resistor pattern may vary from one value to another.
PART NUMBER DESIGNATION
210R
8502
X
G
W
Series
Value
Tolerance
J = ±5%
K = ±10%
M = ±20%
Bond Pads
Backing
First 3 digits are
significant value.
Last digit represents
number of zeros.
R indicates decimal point
G = Gold
W = Gold
L = Lapped
No Letter = Either
No Letter = Aluminum
C0740400
© 2002 California Micro Devices Corp. All rights reserved.
3/02
215 Topaz Street, Milpitas, California 95035
Tel: (408) 263-3214
Fax: (408) 263-7846
www.calmicro.com
1