1N7066 thru 1N7068
Solid State Devices, Inc.
Series
14701 Firestone Blvd * La Mirada, Ca 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
ssdi@ssdi-power.com * www.ssdi-power.com
Designer’s Data Sheet
10 AMP
Part Number/Ordering Information 1/
HYPERFAST RECOVERY RECTIFIER
100 ─ 200 VOLTS, 30 ns
1N70 __ __ __
Screening 2/
└
│
│
│
│
│
│
│
│
│
│
│
└
│
│
│
│
│
│
└
__ = Not Screened
TX = TX Level
TXV = TXV Level
S = S Level
FEATURES:
Hyper fast reverse recovery: 30ns maximum 4/
High surge current: 350 A maximum
Hermetically sealed
Package Type
Low forward voltage drop .95 @10A
Void free ceramic frit glass construction
High temperature category I eutectic metallurgical bond
Available in axial leaded, square tab, and flat leads versions
TX, TXV, and S-level screening available 2/
Available as a QPL product per MIL-PRF-19500/768
Axial lead higher current replacements for:
1N5807, 1N5809, 1N5811
__ = Axial Leaded
SMS = Surface Mount Square Tab
FL = Flat Leads
Voltage/Family
66 = 100V
67 = 150V
68 = 200V
Possible SMS replacements for stud mount:
1N5812, 1N5814, 1N5816
MAXIMUM RATINGS3/
RATING
SYMBOL
VALUE
UNIT
1N7066
1N7067
1N7068
VRRM
VRWM
VR
100
150
200
Peak Repetitive Reverse Voltage
and DC Blocking Voltage
V
Average Rectified Forward Current
IO
10
A
A
(Axial TL ≤ 55°C; SMS TEC ≤ 100°C) 5/
Peak Surge Current
(8.3 ms pulse, half sine wave, superimposed on Io, VRWM = rated,
allow junction to reach equilibrium between pulses, TA = 25°C)
IFSM
350
Operating & Storage Temperature
TJ and TSTG -65 to +175
°C
Junction to Lead for Axial & FL, L =.125"
Junction to End Tab for Surface Mount
RθJL
RθJE
8
4.5
Thermal Resistance
°C/W
NOTES:
Axial Leaded
SMS
Flat Leads (FL)
1/ For ordering information, price, operating curves, and
availability- contact factory.
2/ Screening based on MIL-PRF-19500. Screening flows available
on request.
3/ Unless otherwise specified, all electrical characteristics @ 25°C.
4/ IF = 1A, IR = 1A, IRR = 0.1A, TA = 25°C
5/ Operating at higher IO currents may be achieved based on
specific application and device mounting if TJ is maintained below
175°C.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RC0119K
DOC