ICTE5 thru ICTE18C, 1N6373 thru 1N6386
www.vishay.com
Vishay General Semiconductor
®
TRANSZORB Transient Voltage Suppressors
FEATURES
• Glass passivated chip junction
• Available in uni-directional and bi-directional
• 1500 W peak pulse power capability with a
10/1000 μs waveform, repetitive rate (duty
cycle): 0.01 %
• Excellent clamping capability
• Very fast response time
• Low incremental surge resistance
Case Style 1.5KE
• Solder dip 275 °C max. 10 s, per JESD 22-B106
• AEC-Q101 qualified
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
PRIMARY CHARACTERISTICS
TYPICAL APPLICATIONS
VWM
5.0 V to 18 V
6.0 V to 21.2 V
9.2 V to 21.2 V
1500 W
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and lighting
on ICs, MOSFET, signal lines of sensor units for consumer,
computer, industrial, and telecommunication.
VBR (uni-directional)
V
BR (bi-directional)
PPPM
MECHANICAL DATA
PD
6.5 W
Case: Molded epoxy body over passivated junction
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS-compliant and commercial grade
Base P/NHE3_X - RoHS-compliant and AEC-Q101 qualified
(“X” denotes revision code e.g. A, B, ...)
IFSM
200 A
TJ max.
Polarity
Package
175 °C
Uni-directional, bi-directional
1.5KE
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
DEVICES FOR BI-DIRECTION APPLICATIONS
meets JESD 201 class 2 whisker test
For bi-directional types, use C suffix (e.g. ICTE18C).
Electrical characteristics apply in both directions.
Polarity: For uni-directional types the color band denotes
cathode end, no marking on bi-directional types
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
PPPM
IPPM
LIMIT
1500
UNIT
W
Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1)
Peak pulse current with a 10/1000 μs waveform (1) (fig. 3)
Power dissipation on infinite heatsink at TL = 75 °C (fig. 8)
Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2)
Maximum instantaneous forward voltage at 100 A for uni-directional only
Operating junction and storage temperature range
See next table
6.5
A
PD
W
IFSM
200
A
VF
3.5
V
TJ, TSTG
-55 to +175
°C
Notes
(1)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
8.3 ms single half sine-wave, duty cycle = 4 pulses per minute maximum
(2)
Revision: 16-Jan-18
Document Number: 88356
1
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000