Datasheet > 1N4734DPE3TR

1N4734DPE3TR

更新时间： 2024-11-27 08:13:19

品牌	Logo	应用领域
美高森美 - MICROSEMI		测试二极管
页数	文件大小	规格书
3页	168K
描述
Zener Diode, 5.6V V(Z), 1%, 1W, Silicon, Unidirectional, DO-204AL, PLASTIC, DO-41, 2 PIN

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

1N4734DPE3TR 技术参数

是否Rohs认证：	符合	生命周期：	Obsolete
零件包装代码：	DO-41	包装说明：	O-PALF-W2
针数：	2	Reach Compliance Code：	unknown
ECCN代码：	EAR99	HTS代码：	8541.10.00.50
风险等级：	5.57	外壳连接：	ISOLATED
配置：	SINGLE	二极管元件材料：	SILICON
二极管类型：	ZENER DIODE	JEDEC-95代码：	DO-204AL
JESD-30 代码：	O-PALF-W2	JESD-609代码：	e3
湿度敏感等级：	1	元件数量：	1
端子数量：	2	封装主体材料：	PLASTIC/EPOXY
封装形状：	ROUND	封装形式：	LONG FORM
峰值回流温度（摄氏度）：	NOT SPECIFIED	极性：	UNIDIRECTIONAL
最大功率耗散：	1 W	认证状态：	Not Qualified
标称参考电压：	5.6 V	表面贴装：	NO
技术：	ZENER	端子面层：	Matte Tin (Sn)
端子形式：	WIRE	端子位置：	AXIAL
处于峰值回流温度下的最长时间：	NOT SPECIFIED	最大电压容差：	1%
工作测试电流：	45 mA

1N4734DPE3TR 数据手册

1N4728AP thru 1N4764AP,e3 (PLASTIC)

Silicon 1 Watt Zener Diodes

S C O T T S D A L E D I V I S I O N

DESCRIPTION

APPEARANCE

The popular 1N4728AP thru 1N4764AP series of 1.0 watt Zeners provides

voltage regulation in a selection from 3.3 to 100 volts in 5% tolerances with

other tighter tolerances also available as identified by different suffix letters

in the part number. These plastic encapsulated Zeners are moisture

classified as Level 1 with no dry pack required. They are also available in

various military screening levels by adding a prefix identifier as described in

the Features below. These plastic molded Zeners with a P suffix provide a

lower thermal resistance compared to the glass-body (G suffix) option for

these same JEDEC part numbers. Both package options are available by

Microsemi in RoHS Compliant devices with an “e3” suffix. Microsemi also

offers numerous other Zener products to meet higher and lower power and

test current applications.

DO-41 or

DO-204AL

(Plastic)

IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com

FEATURES

APPLICATIONS / BENEFITS

•

JEDEC registered 1N4728A to 1N4764A

•

Regulates voltage over a broad operating current and

temperature range

Extensive voltage selection from 3.3 to 100 V

Standard voltage tolerances are plus/minus 5% with

A suffix and 10 % with no suffix identification

Options for screening in accordance with MIL-PRF-

19500 for JAN, JANTX, JANTXV, and JANS are

available by adding MQ, MX, MV, or MSP prefixes

respectively to part numbers.

Tight tolerances available in plus or minus 2% or 1%

with C or D suffix respectively

•

Surface mount equivalents available as SMAJ4728A to

SMAJ4764A and MLL4728A to MLL4764A (consult

factory for others)

•

Flexible axial-lead mounting terminals

Nonsensitive to ESD per MIL-STD-750 Method 1020

Moisture classification is Level 1 per IPC/JEDEC J-

STD-020B with no dry pack required

RoHS Compliant devices available by adding “e3” suffix

MAXIMUM RATINGS

MECHANICAL AND PACKAGING

•

Power dissipation at 25^ºC: 1.0 watts (also see

derating in Figure 1).

•

CASE: Void-free transfer molded thermosetting

epoxy body meeting UL94V-0

Operating and Storage temperature: -65^ºC to

TERMINALS: Tin-Lead (Sn/Pb) or RoHS Compliant

annealed matte-Tin plating solderable per MIL-STD-

750, method 2026

+150^ºC

Thermal Resistance: 45 ^ºC/W junction to lead at 3/8

(10 mm) lead length from body, or 105^ºC/W junction

to ambient when mounted on FR4 PC board (1 oz

Cu) with 4 mm²copper pads and track width 1 mm,

length 25 mm

Steady-State Power: 1.0 watts at T_L< 105^oC 3/8

inch (10 mm) from body or at T_A< 45^ºC when

mounted on FR4 PC board as described for thermal

resistance above (also see Figure 1)

•

POLARITY: Cathode indicated by band. Diode to be

operated with the banded end positive with respect to

the opposite end for Zener regulation

•

MARKING: Part number

•

TAPE & REEL option: Standard per EIA-296 (add

“TR” suffix to part number)

•

WEIGHT: 0.7 grams

See package dimensions on last page

•

Forward voltage @200 mA: 1.2 volts (maximum)

Solder Temperatures: 260 ^ºC for 10 s (max)

10-18-2005 REV C

Microsemi

Page 1

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

12 3

中文翻译

下载PDF

与1N4734DPE3TR相关器件

型号	品牌	获取价格	描述	数据表
1N4734DRL	ONSEMI	获取价格	5.6V, 1W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-41, GLASS, CASE 59-03, 2 PIN
1N4734DRL2	ONSEMI	获取价格	ZENER DIODE,SINGLE, TWO TERMINAL,5.6V V(Z),1%,DO-41
1N4734DTA2	MOTOROLA	获取价格	5.6V, 1W, SILICON, UNIDIRECTIONAL VOLTAGE REGULATOR DIODE, DO-41, GLASS, CASE 59-03, 2 PIN
1N4734DUR-1	MICROSEMI	获取价格	Zener Diode, 5.6V V(Z), 1%, 1W, Silicon, Unidirectional, DO-213AB, HERMETIC SEALED, GLASS,
1N4734DUR-1E3	MICROSEMI	获取价格	Zener Diode, 5.6V V(Z), 1%, 1W, Silicon, Unidirectional, DO-213AB, ROHS COMPLIANT, HERMETI
1N4734DUR-1E3/TR	MICROSEMI	获取价格	Zener Diode, 5.6V V(Z), 1%, 1W, Silicon, Unidirectional, DO-213AB, ROHS COMPLIANT, HERMETI
1N4734DUR-1TR	MICROSEMI	获取价格	Zener Diode, 5.6V V(Z), 1%, 1W, Silicon, Unidirectional, DO-213AB, HERMETIC SEALED, GLASS,
1N4734DUR-1TRE3	MICROSEMI	获取价格	Zener Diode, 5.6V V(Z), 1%, 1W, Silicon, Unidirectional, DO-213AB, ROHS COMPLIANT, HERMETI
1N4734DURE3	MICROSEMI	获取价格	Zener Diode, 5.6V V(Z), 1%, 1W, Silicon, Unidirectional, DO-213AB, ROHS COMPLIANT, HERMETI
1N4734DURE3TR	MICROSEMI	获取价格	Zener Diode, 5.6V V(Z), 1%, 1W, Silicon, Unidirectional, DO-213AB, HERMETIC SEALED, GLASS,

与1N4734DPE3TR相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

45
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

34
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

62
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

59

产品中心

服务支持

精选活动

关于我们

帮助中心

1N4734DPE3TR

1N4734DPE3TR 技术参数

1N4734DPE3TR 数据手册

与1N4734DPE3TR相关器件

与1N4734DPE3TR相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

1N4734DPE3TR

1N4734DPE3TR 技术参数

1N4734DPE3TR 数据手册

与1N4734DPE3TR相关器件

与1N4734DPE3TR相关文章

您还可以找

您在本页遇到什么问题？