Datasheet > 1N3048DUR-1E3TR

1N3048DUR-1E3TR

更新时间： 2024-02-26 07:00:11

品牌	Logo	应用领域
美高森美 - MICROSEMI		测试二极管
页数	文件大小	规格书
3页	168K
描述
Zener Diode, 150V V(Z), 1%, 1.25W, Silicon, Unidirectional, DO-213AB, ROHS COMPLIANT, HERMETIC SEALED, LEADLESS, GLASS, MELF-2

阅读下载

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

1N3048DUR-1E3TR 技术参数

是否Rohs认证：	符合	生命周期：	Obsolete
零件包装代码：	DO-213AB	包装说明：	O-LELF-R2
针数：	2	Reach Compliance Code：	unknown
ECCN代码：	EAR99	HTS代码：	8541.10.00.50
风险等级：	5.77	Is Samacsys：	N
其他特性：	METALLURGICALLY BONDED, HIGH RELIABILITY	外壳连接：	ISOLATED
配置：	SINGLE	二极管元件材料：	SILICON
二极管类型：	ZENER DIODE	JEDEC-95代码：	DO-213AB
JESD-30 代码：	O-LELF-R2	JESD-609代码：	e3
元件数量：	1	端子数量：	2
封装主体材料：	GLASS	封装形状：	ROUND
封装形式：	LONG FORM	峰值回流温度（摄氏度）：	NOT SPECIFIED
极性：	UNIDIRECTIONAL	最大功率耗散：	1.25 W
认证状态：	Not Qualified	标称参考电压：	150 V
表面贴装：	YES	技术：	ZENER
端子面层：	MATTE TIN	端子形式：	WRAP AROUND
端子位置：	END	处于峰值回流温度下的最长时间：	NOT SPECIFIED
最大电压容差：	1%	工作测试电流：	1.7 mA
Base Number Matches：	1

1N3048DUR-1E3TR 数据手册

1N3016BUR-1 thru 1N3051BUR-1, e3

(or MLL3016B thru MLL3051B, e3)

Surface Mount 1.5 W

S C O T T S D A L E D I V I S I O N

GLASS ZENER DIODES

DESCRIPTION

APPEARANCE

This surface mountable zener diode series is similar to the 1N3016 thru

1N3051 JEDEC registration in the DO-13 package except that it meets the

surface mount DO-213AB outline. It is an ideal selection for applications of

high density and low parasitic requirements. Due to its glass hermetic seal

qualities and metallurgically enhanced internal construction, it is also well

suited for high-reliability applications. This can be acquired by a source

control drawing (SCD), or by ordering device types with MQ, MX, or MV

prefix to part number for equivalent screening to JAN, JANTX or JANTXV.

DO-213AB

IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com

FEATURES

APPLICATIONS / BENEFITS

•

Leadless surface mount package equivalents to the

JEDEC registered 1N3016 thru 1N3051 except with

higher power rating of 1.5 Watts

•

Regulates voltage over a broad operating current

and temperature range

•

Wide selection from 6.8 to 200 V

Tight voltage tolerances available

Low reverse (leakage) currents

Leadless package for surface mounting

Ideal for high-density mounting

•

Ideal for high-density mounting

Voltage range: 6.8 to 200 volts

Hermetically sealed, double-slug glass construction

Metallurgically enhanced contact construction.

Options for screening in accordance with MIL-PRF-

19500/115 for JAN, JANTX, JANTXV, and JANS with

MQ, MX, MV, or MSP prefixes respectively for part

numbers, e.g. MX1N3016BUR-1, MV1N3051BUR-1,

etc.

Metallurgically enhanced internal contact design for

greater reliability and lower thermal resistance

•

Nonsensitive to ESD

Hermetically sealed glass package

Specified capacitance (see Figure 2)

•

Axial lead “thru-hole” DO-13 packages per JEDEC

registration available as 1N3016B thru 1N3051B (see

separate data sheet with MIL-PRF-19500/115

qualification)

Inherently radiation hard as described in Microsemi

MicroNote 050

RoHS Compliant devices available by adding “e3” suffix

MAXIMUM RATINGS

MECHANICAL AND PACKAGING

•

Power dissipation at 25^ºC: 1.5 watts (also see

derating in Figure 1).

•

CASE: Hermetically sealed glass MELF package

TERMINALS: Tin-lead or RoHS compliant

annealed matte-Tin plating solderable per MIL-

STD-750, method 2026

Operating and Storage temperature: -65^ºC to

+175^ºC

Thermal Resistance: 40 ^ºC/W junction to end cap,

or 120^ºC/W junction to ambient when mounted on

FR4 PC board (1 oz Cu) with recommended

footprint (see last page)

•

POLARITY: Cathode indicated by band. Diode to

be operated with the banded end positive with

respect to the opposite end for Zener regulation

•

MARKING: Cathode band only

•

Steady-State Power: 1.50 watts at end-cap

temperature T_EC< 115^oC, or 1.25 watts at T_A= 25^ºC

when mounted on FR4 PC board and

recommended footprint as described for thermal

resistance (also see Figure 1)

TAPE & REEL optional: Standard per EIA-481-1-A

with 12 mm tape, 1500 per 7 inch reel or 5000 per

13 inch reel (add “TR” suffix to part number)

•

WEIGHT: 0.05 grams

See package dimensions on last page

•

Forward voltage @200 mA: 1.2 volts (maximum)

Solder Temperatures: 260 ^ºC for 10 s (max)

3-12-2006 REV D

Microsemi

Page 1

Scottsdale Division

8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503

12 3

下载PDF

与1N3048DUR-1E3TR相关器件

型号	品牌	描述	获取价格	数据表
1N3048DUR-1TR	MICROSEMI	Zener Diode, 150V V(Z), 1%, 1.25W, Silicon, Unidirectional, DO-213AB, HERMETIC SEALED, LEA	获取价格
1N3048DUR-1TRE3	MICROSEMI	Zener Diode, 150V V(Z), 1%, 1.5W,	获取价格
1N3048TR	MICROSEMI	1 WATT METAL CASE ZENER DIODES	获取价格
1N3048TRE3	MICROSEMI	Zener Diode, 150V V(Z), 20%, 1W,	获取价格
1N3048TRUR-1	MICROSEMI	1 WATT METAL CASE ZENER DIODES	获取价格
1N3048UR-1	MICROSEMI	1 WATT METAL CASE ZENER DIODES	获取价格

产品中心

服务支持

精选活动

关于我们

帮助中心

1N3048DUR-1E3TR

1N3048DUR-1E3TR 技术参数

1N3048DUR-1E3TR 数据手册

与1N3048DUR-1E3TR相关器件

与1N3048DUR-1E3TR相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

1N3048DUR-1E3TR

1N3048DUR-1E3TR 技术参数

1N3048DUR-1E3TR 数据手册

与1N3048DUR-1E3TR相关器件

与1N3048DUR-1E3TR相关文章

您还可以找

您在本页遇到什么问题？