1N3016B thru 1N3051B, e3
1 WATT METAL CASE ZENER DIODES
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
This well established zener diode series for the 1N3016 thru 1N3051
JEDEC registration in the metal case DO-13 package provides a glass
hermetic seal for 6.8 to 200 volts. It is also well suited for high-reliability
applications where it is available in JAN, JANTX, and JANTXV military
qualifications. Lower voltages are also available in the 1N3821 thru
1N3830 series (3.3 V to 7.5 V) in the same package (see separate data
sheet). Microsemi also offers numerous other Zener diode products for a
variety of other packages including surface mount.
DO-13
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
•
•
•
Zener Voltage Range: 6.8V to 200V
Hermetically sealed DO-13 metal package
Internally solder-bonded construction.
•
Regulates voltage over a broad operating current
and temperature range
•
•
•
•
•
•
Wide selection from 6.8 to 200 V
Tight voltage tolerances available
Low reverse (leakage) currents
Nonsensitive to ESD
Also available in JAN, JANTX, JANTXV qualifications
per MIL-PRF19500/115 by adding the JAN, JANTX,
or JANTXV prefixes to part numbers for desired level
of screening, e.g. JANTX1N3016B,
Hermetically sealed metal package
JANTXV1N3051B, etc.
Inherently radiation hard as described in
Microsemi MicroNote 050
•
•
Surface mount also available with 1N3016BUR-1 thru
1N3051BUR-1 series on separate data sheet
RoHS Compliant devices available by adding “e3” suffix
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
Operating Junction and Storage Temperatures:
-65oC to +175oC
THERMAL RESISTANCE: 50oC/W* junction to lead
at 0.375 inches (10 mm) from body or 110 oC/W
junction to ambient when leads are mounted on FR4
PC board with 4 mm2 copper pads (1 oz) and track
width 1 mm, length 25 mm
DC Power Dissipation*: 1.0 Watt at TL < +125oC 3/8”
(10 mm) from body or 1.0 Watts at TL < +65oC when
mounted on FR4 PC board as described for thermal
resistance above (also see Fig 1)
•
•
CASE: DO-13 (DO-202AA), welded, hermetically
sealed metal and glass
FINISH: All external surfaces are Tin-Lead (Pb/Sn)
or RoHS Compliant annealed matte-Tin (Sn) plating
and solderable per MIL-STD-750 method 2026
•
•
•
POLARITY: Cathode connected case.
WEIGHT: 1.4 grams.
•
Tape & Reel option: Standard per EIA-296 (add
“TR” suffix to part number)
•
See package dimensions on last page
•
•
Forward Voltage @ 200 mA: 1.5 Volts.
Solder Temperatures: 260 o C for 10 s (maximum)
o
*
For further mounting reference options, thermal resistance from junction to metal case is < 20 C/W
when mounting DO-13 metal case directly on heat sink.
Copyright © 2006
3-12-2006 REV B
Microsemi
Scottsdale Division
Page 1
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503