1N3016BUR-1 thru 1N3051BUR-1, e3
(or MLL3016B thru MLL3051B, e3)
Surface Mount 1.5 W
S C O T T S D A L E D I V I S I O N
GLASS ZENER DIODES
DESCRIPTION
APPEARANCE
This surface mountable zener diode series is similar to the 1N3016 thru
1N3051 JEDEC registration in the DO-13 package except that it meets the
surface mount DO-213AB outline. It is an ideal selection for applications of
high density and low parasitic requirements. Due to its glass hermetic seal
qualities and metallurgically enhanced internal construction, it is also well
suited for high-reliability applications. This can be acquired by a source
control drawing (SCD), or by ordering device types with MQ, MX, or MV
prefix to part number for equivalent screening to JAN, JANTX or JANTXV.
DO-213AB
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
Leadless surface mount package equivalents to the
JEDEC registered 1N3016 thru 1N3051 except with
higher power rating of 1.5 Watts
•
Regulates voltage over a broad operating current
and temperature range
•
•
•
•
•
•
Wide selection from 6.8 to 200 V
Tight voltage tolerances available
Low reverse (leakage) currents
Leadless package for surface mounting
Ideal for high-density mounting
•
•
•
•
•
Ideal for high-density mounting
Voltage range: 6.8 to 200 volts
Hermetically sealed, double-slug glass construction
Metallurgically enhanced contact construction.
Options for screening in accordance with MIL-PRF-
19500/115 for JAN, JANTX, JANTXV, and JANS with
MQ, MX, MV, or MSP prefixes respectively for part
numbers, e.g. MX1N3016BUR-1, MV1N3051BUR-1,
etc.
Metallurgically enhanced internal contact design for
greater reliability and lower thermal resistance
•
•
•
•
Nonsensitive to ESD
Hermetically sealed glass package
Specified capacitance (see Figure 2)
•
•
Axial lead “thru-hole” DO-13 packages per JEDEC
registration available as 1N3016B thru 1N3051B (see
separate data sheet with MIL-PRF-19500/115
qualification)
Inherently radiation hard as described in Microsemi
MicroNote 050
RoHS Compliant devices available by adding “e3” suffix
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
•
Power dissipation at 25ºC: 1.5 watts (also see
derating in Figure 1).
•
•
CASE: Hermetically sealed glass MELF package
TERMINALS: Tin-lead or RoHS compliant
annealed matte-Tin plating solderable per MIL-
STD-750, method 2026
Operating and Storage temperature: -65ºC to
+175ºC
Thermal Resistance: 40 ºC/W junction to end cap,
or 120ºC/W junction to ambient when mounted on
FR4 PC board (1 oz Cu) with recommended
footprint (see last page)
•
POLARITY: Cathode indicated by band. Diode to
be operated with the banded end positive with
respect to the opposite end for Zener regulation
•
•
MARKING: Cathode band only
•
Steady-State Power: 1.50 watts at end-cap
temperature TEC < 115oC, or 1.25 watts at TA = 25ºC
when mounted on FR4 PC board and
recommended footprint as described for thermal
resistance (also see Figure 1)
TAPE & REEL optional: Standard per EIA-481-1-A
with 12 mm tape, 1500 per 7 inch reel or 5000 per
13 inch reel (add “TR” suffix to part number)
•
•
WEIGHT: 0.05 grams
See package dimensions on last page
•
•
Forward voltage @200 mA: 1.2 volts (maximum)
Solder Temperatures: 260 ºC for 10 s (max)
Copyright © 2006
3-12-2006 REV D
Microsemi
Page 1
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
5秒后页面跳转
AO3401场效应管参数、引脚图、应用原理图
BT131可控硅参数及引脚图、工作原理详解
74LS32芯片参数、引脚图及功能真值表
全球首块英伟达H200交付 黄仁勋“送货上门”
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
