1N2970 thru 1N3015B
and 1N3993 thru 1N4000A
10 WATT ZENER DIODES
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
These high power 10 W Zener diodes represented by the JEDEC
registered 1N2970 thru 1N3015B and 1N3993 thru 1N4000A series provide
voltage regulation in a selection over a 3.9 V to 200 V broad range of
voltages. They may be operated up to 10 W with adequate mounting and
heat sinking with their low thermal resistance. These Zeners are also
available in JAN, JANTX, JANTXV military qualifications. Microsemi also
offers numerous other Zener products to meet higher and lower power
applications.
DO-4
(DO-203AA)
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
JEDEC registered 1N2970 thru 1N3015B and
•
•
Regulates voltage over a broad operating
current and temperature range
Standard voltage tolerances are +/- 5% with B
suffix, +/-10% with an A suffix, and +/-20% with
no suffix
1N3993 thru 1N4000A
•
•
•
•
Internal solder bond construction
Hermetically sealed (welded)
Zener Voltage 3.9V to 200V.
Also available in JAN, JANTX, and JANTXV
qualifications per MIL-PRF-19500/124 by
adding the JAN, JANTX, or JANTXV prefixes to
part numbers for desired level of screening;
(e.g. JANTX1N2970B, JANTXV1N3996A, etc.
Standard polarity is anode to case (stud) for
1N2970 thru 1N3015B and cathode to case for
1N3993 thru 1N4000A
Reverse polarity is cathode to case for 1N2970
thru 1N3015B and anode to case for 1N3993
thru 1N4000A by designating R suffix, e.g.
1N2970RB, 1N3993RA, etc.
•
Consult factory for +/-2% or +/-1% voltage
tolerance with a C or D suffix respectively
•
•
Reverse polarity available
Nonsensitive to ESD per MIL-STD-750 Method
1020
•
•
•
Inherently radiation hard as described in
Microsemi MicroNote 050
•
Consult factory for surface mount equivalents
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
•
•
•
•
Junction Temperatures: -65oC to +175oC
Storage Temperatures: -65oC to +200oC
DC Power Dissipation: 10 Watts
•
CASE: Industry Standard DO-4, (DO-203AA), 7/16”
Hex, stud with 10-32 threads, welded, hermetically
sealed metal and glass
•
•
FINISH: All external surfaces are corrosion
Power Derating: 80 mW/oC above 50oC
Forward Voltage @ 2.0 A: 1.5 Volts
resistant and terminal solderable
POLARITY: 1N3993 – 1N4000: Std. Polarity is
cathode to stud. Reverse polarity (anode to stud)
indicated by suffix “R”
THERMAL RESISTANCE: 10oC/W (typical)
junction to case (stud)
•
Solder temperatures: 260 oC for 10 s (max)
1N2970 – 1N3015: Std. Polarity is anode to stud.
Reverse polarity indicated by suffix “R”
•
•
WEIGHT: 7.5 grams
MOUNTING HARDWARE: Consult factory for
optional insulator, bushing solder terminal,
washers, and nut
•
See package dimension on last page
Copyright 2003
Microsemi
Page 1
11-12-2003 REV A
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503