1D14B Series
1W Single/Dual Output - Fixed Input - Isolated & Unregulated
DIP PACKAGE
DC-DC Converter
1 Watt
The 1D14B series is specially designed for applications where an isolated voltage
is required in a distributed power supply system.
These products apply to:
1) Where the voltage of the input power supply is fixed (voltage variation ≤ 10ꢀ)
2) Where isolation is necessary between input and output
(isolation voltage =1500VDC)
High Efficiency up to 81%
DIP Package
Industry Standard Pinout
UL94-V0 Package
1.5KVDC Isolation
Short circuit protection (SCP)
Temperature Range:
-40°C~+105°C
No External Component
Required
RoHS Compliance
3) Where do not has high requirement of line regulation and load regulation
Such as: pure digital circuits, low frequency analog circuits, relay-driven circuits
and data switching circuits.
UL-60950-1 Certified
E347551
Common specifications
Short circuit protection:
Temperature rise at full load:
Cooling:
Output specifications
1 second
Item
Test condition
Min
0.1
Typ
Max
1
Units
W
25°C TYP
Output power
Line regulation
Load regulation
Free air convection
-40°C – +105°C
-55°C – +125°C
300°C (1.5mm from case for 10 sec.)
< 95ꢀ
For Vin change of 1ꢀ
1.2
ꢀ
Operation temperature range:
Storage temperature range:
Lead temperature
Storage humidity range:
Case material:
10ꢀ to 100ꢀ full load
• 5V Output
• 9V Output
• 12V Output
• 15V Output
• 24V Output
12
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
9
8
7
6
Plastic [UL94-V0]
>3,500,000 hours
2.4g
Output voltage
accuracy
See tolerance envelope graph
MTBF:
Temperature drift
Ripple & Noise*
100ꢀ full load
0.03 ꢀ/°C
mVp-p
Weight:
20MHz Bandwidth
60
100
Switching frequency Full load, nominal input
300
KHz
Input specifications
*
Ripple and noise tested with “parallel cable” method, please see DC-DC
Converter Application Notes for specific operation methods.
Item
Test condition
Min
Typ
Max
Units
** Supply voltage must be discontinued at the end of short circuit duration for
1D14B series of 24V input.
Input current
(No load/full load)
• 5V input
25/256
15/106
10/84
7/54
mA
mA
mA
mA
• 12V input
• 15V input
• 24V input
Model selection:
WCTP**_xxyyN##O
W=Watt; C= Case; T=Type; P=Pinning; **= Voltage Variation (omitted
10ꢀ); xx= Vin; yy= Vout; N= Numbers of Output; ##= Isolation
(kVDC); O= output regulation
Surge voltage
(1S max)
• 5V input
-0.7
-0.7
-0.7
-0.7
9
VDC
VDC
VDC
VDC
• 12V input
• 15V input
• 24V input
18
21
30
Reflected ripple
current
15
mA
Example:
1D14B_0505D1U
1= 1Watt; D14= DIP14; A= Pinning; 5Vin; 5Vout; D= Dual Output;
1= 1kVDC; U= Unregulated Output; P= Short Circuit Protection (SCP)
Filter
Capacitor
Isolation specifications
Item
Note:
1. Operation under minimum load will not damage the converter; However, they
may not meet all specification listed, and that will reduce the life of product.
2. All specifications measured at Ta=25°C, humidity<75ꢀ, nominal input voltage
and rated output load unless otherwise specified.
3. In this datasheet, all the test methods of indications are based on corporate
standards.
Test condition
Min
Typ
20
Max
Units
VDC
Isolation voltage
Tested for 1 minute
and 1mA max
1500
Isolation resistance
Test at 500VDC
1000
MΩ
Isolation Capacitance Input/output,
100KHz/0.1V
pF
4. Only typical models listed, other models may be different, please contact our
technical person for more details.
EMC specifications
EMI
EMI
EMS
CE
CISPR22/EN55022
CISPR22/EN55022
IEC/EN61000-4-2
CLASS B
CLASS B
(External Circuit Refer to EMC recommended circuit)
(External Circuit Refer to EMC recommended circuit)
RE
ESD
Contact 6KV perf. Criteria B
Page 1 of 3
1D14B – Rev. 2014-1.8
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com