MODEL: 18PF
Rack-mounted DCS Signal Conditioners 18-RACK
OUTPUT 2
Voltage
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
POWER FACTOR TRANSDUCER
Functions & Features
• Providing two DC output signals in proportion to power
POWER INPUT
factor
DC Power
• DC output containing little ripple is ideal for computer
input
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Typical Applications
GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw
terminals on the front and connector on the rear; terminal
cover provided
• Centralized monitoring and control of power management
system in a manufacturing facility or building
• Measuring power factor for a motor
Connection
Input: M3.5 screw terminals (torque 0.8 N·m)
Output 1: Connector
Output 2: Connector
Power input: Supplied from connector
Screw terminal: Nickel-plated steel
Isolation: Voltage input to current input to output 1 to
output 2 to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
MODEL: 18PF–1[1][2]66–R
ORDERING INFORMATION
• Code number: 18PF-1[1][2]66-R
Specify a code from below for each of [1] and [2].
(e.g. 18PF-11P66-R)
INPUT SPECIFICATIONS
Note: A device which employs different measuring methods
may show different outputs from that of M-System's.
Frequency: 50 or 60 Hz
• Current Input
Input burden: 0.1 VA (input 1 A)
0.5 VA (input 5 A)
CONFIGURATION
1: 3-phase / 3-wire
Operational range: 10 – 120 % of rating
Overload capacity: 1000 % of rating for 3 sec., 200 %
for 10 sec., 120 % continuous
• Voltage Input
[1] INPUT (balanced load)
1: 110 V / 5 A AC
2: 110 V / 1 A AC
Input burden: Approx. 0.5 VA
Operational range: 85 – 120 % of rating
Overload capacity: 150 % of rating for 10 sec., 120 %
continuous
3: 220 V / 1 A AC
4: 220 V / 5 A AC
[2] OUTPUT SIGNAL POLARITY
P: Negative in lag, positive in lead
■ Input range:
Lag 0.5 – 1 – lead 0.5
M: Negative in lead, positive in lag
Lead 0.5 – 1 – lag 0.5
OUTPUT 1
Voltage
6: 1 – 5 V DC (Load resistance 5000 Ω min.)
18PF SPECIFICATIONS
ES-1868 Rev.8 Page 1/3
http://www.m-system.co.jp/