5秒后页面跳转
18JV-H66-R PDF预览

18JV-H66-R

更新时间: 2024-09-17 02:50:39
品牌 Logo 应用领域
爱模 - MSYSTEM DCS分布式控制系统
页数 文件大小 规格书
3页 94K
描述
Rack-mounted DCS Signal Conditioners 18-RACK

18JV-H66-R 数据手册

 浏览型号18JV-H66-R的Datasheet PDF文件第2页浏览型号18JV-H66-R的Datasheet PDF文件第3页 
MODEL: 18JV  
Rack-mounted DCS Signal Conditioners 18-RACK  
POWER INPUT  
DC Power  
R: 24 V DC  
SIGNAL TRANSMITTER  
(field-programmable)  
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)  
Functions & Features  
• Converting a DC input into two standard process signals  
• Micro-processor based  
RELATED PRODUCTS  
• Programming Unit (model: PU-2x)  
• Field-programmable input range  
• Loop testing via hand-held programmer PU-2x  
• Second channel output available at the front terminals  
and at the Standard Rack connector  
• PC configurator software (model: JXCON)  
Downloadable at M-System’s web site.  
A dedicated cable is required to connect the module to the  
PC. Please refer to the internet software download site or  
the users manual for the PC configurator for applicable  
cable types.  
GENERAL SPECIFICATIONS  
Construction: Rack-mounted; terminal access via screw  
terminals on the front and connector on the rear; terminal  
cover provided  
Connection  
Input: M3.5 screw terminals (torque 0.8 N·m)  
Output 1: Connector  
MODEL: 18JV–[1]66–R  
Output 2: M3.5 screw terminals (torque 0.8 N·m)  
and connector  
Power input: Supplied from connector  
Screw terminal: Nickel-plated steel  
ORDERING INFORMATION  
• Code number: 18JV-[1]66-R  
Isolation: Input to output 1 to output 2 to power  
Overrange output: Approx. -10 to +120 % at 1 – 5 V  
Adjustments: Programming Unit (model: PU-2x); Input  
range, zero and span, simulating output, etc.  
(Input range can be changed with Codes U1, U2 or U3 and  
limited within ranges of each code type.)  
(Refer to the users manual of JXCON for the adjustments  
configurable with JXCON.)  
Specify a code from below for [1].  
(e.g. 18JV-U166-R)  
• Special input range (For codes U1, U2 & U3)  
[1] INPUT  
Current  
A: 4 – 20 mA DC (Input resistance 250 Ω)  
H: 10 – 50 mA DC (Input resistance 100 Ω)  
Voltage  
INPUT SPECIFICATIONS  
DC Current: Input resistor incorporated  
DC Voltage: -10 – +10 V DC  
Minimum span: 3 mV  
6: 1 – 5 V DC (Input resistance 1 MΩ min.)  
U1: Range ±100 mV;  
(Minimum span 3 mV, Input resistance 20 kΩ min.)  
U2: Range ±1000 mV;  
Offset: Max. 3 times span  
(Minimum span 30 mV, Input resistance 20 kΩ min.)  
U3: Range ±10 V;  
Default setting will be used if not otherwise specified.  
U1: 0 – 100 mV DC  
(Minimum span 0.3 V,Input resistance 1 MΩ min.)  
U2: 0 – 1 V DC  
U3: 0 – 10 V DC  
OUTPUT 1  
Voltage  
OUTPUT SPECIFICATIONS  
6: 1 – 5 V DC (Load resistance 2000 Ω min.)  
With the input voltage code 6, U3 (0 % ≥ 0 V) and current,  
the output goes below 0 % when the input is open.  
OUTPUT 2  
Voltage  
6: 1 – 5 V DC (Load resistance 2000 Ω min.)  
18JV SPECIFICATIONS  
ES-1862 Rev.8 Page 1/3  
http://www.m-system.co.jp/  

与18JV-H66-R相关器件

型号 品牌 获取价格 描述 数据表
18JV-U166-R MSYSTEM

获取价格

Rack-mounted DCS Signal Conditioners 18-RACK
18JV-U266-R MSYSTEM

获取价格

Rack-mounted DCS Signal Conditioners 18-RACK
18JV-U366-R MSYSTEM

获取价格

Rack-mounted DCS Signal Conditioners 18-RACK
18K.5%FA10A20PPM-CARDPACK VISHAY

获取价格

Fixed Resistor, Wire Wound, 10W, 18000ohm, 632V, 0.5% +/-Tol, -20,20ppm/Cel,
18K-.5%-FA7-20PPM-CARDPACK VISHAY

获取价格

Fixed Resistor, Wire Wound, 7W, 18000ohm, 560V, 0.5% +/-Tol, -20,20ppm/Cel,
18K-.5%-FA7A-20PPM-TANDR VISHAY

获取价格

Fixed Resistor, Wire Wound, 7W, 18000ohm, 490V, 0.5% +/-Tol, -20,20ppm/Cel,
18K0J OHMITE

获取价格

Power Chip® Thick Film on Alumina Substrate
18K121-K20D3 ROSENBERGER

获取价格

Calibration Kit
18K12L-000D3 ROSENBERGER

获取价格

Calibration Kit
18K12S-000D3 ROSENBERGER

获取价格

Calibration Kit