Datasheet > 189543--2

189543--2

更新时间： 2022-02-26 11:18:18

品牌	Logo	应用领域
MACOM		/
页数	文件大小	规格书
4页	108K
描述
0.8mm CHAMP* Crimper Assemblies

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

189543--2 数据手册

Instruction Sheet

0.8mm CHAMP* Crimper Assemblies

122842-1, 122842-2, and 122842-3

408-4040

25 FEB 10 Rev C

Setscrew

(Ref)

Manual Arbor Frame

Assembly 91085-2 (Ref)

Adjustment Ring

(Ref)

Handle (Ref)

Flat Head Cap

Screw (Qty: 2)

Socket Head Cap Screw

(Ref)

Tool Mount

Rear Tool Stop

Crimper

Frame Assembly

Slide Base (Ref)

Ram (Ref)

Tool Stop (Ref)

Cable Clamp

Spring

Support

Block

Slide Plate

Figure 1

1. INTRODUCTION

2. DESCRIPTION (See Figure 1)

The crimper assembly consists of an upper and lower

tooling assembly.

0.8mm CHAMP Crimper Assemblies 122842--1,

122842--2, and 122842--3 are designed for use in

Manual Arbor Frame Assembly 91085--2 (shown in

Figure 1) and are used to crimp metal backshell

assemblies onto 0.8mm CHAMP connectors. This

instruction sheet provides procedures for crimper

assembly installation, adjustments, crimping, and

maintenance and inspection. Refer to instruction

sheet 408--7777 for details concerning the operation

and maintenance of the arbor frame assembly.

The upper tooling assembly consists of a tool mount

and a crimper. The crimper is secured to the tool

mount, which is mounted to the ram of the arbor

frame assembly with the socket head cap screws

supplied with the crimper assembly.

The lower tooling assembly consists of a slide plate, a

support block, and a cable clamp spring. The lower

tooling assembly mates with the slide base of the

arbor frame assembly.

Read these instructions thoroughly before using the

crimper assembly.

3. INSTALLATION OF CRIMPER ASSEMBLY

All numerical values in this instruction sheet are

in metric units [with U.S. customary units in

brackets]. Dimensions are in millimeters [and

inches]. Figures are not drawn to scale.

NOTE

To install the crimper assembly, refer to Figure 1, and

proceed as follows:

The frame assembly must be secured to a work

bench to ensure stability during operation.

DANGER

Reasons for reissue of this instruction sheet are

provided in Section 8, REVISION SUMMARY.

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

This controlled document is subject to change.

E2010 Tyco Electronics Corporation, Berwyn, PA

1 of 4

For latest revision and Regional Customer Service,

visit our website at www.tycoelectronics.com

TE logo and Tyco Electronics are trademarks.

LOC B

*Trademark. Other products names, logos, or company names might be trademarks of their respective owners.

12 3 4

下载PDF

与189543--2相关器件

型号	品牌	描述	获取价格	数据表
189544--1	MACOM	0.8mm CHAMP* Crimper Assemblies	获取价格
189544--2	MACOM	0.8mm CHAMP* Crimper Assemblies	获取价格
1895489	PHOENIX	Barrier Strip Terminal Block,	获取价格
1895492	PHOENIX	Barrier Strip Terminal Block,	获取价格
1895515	PHOENIX	Barrier Strip Terminal Block,	获取价格
1895557	PHOENIX	Barrier Strip Terminal Block,	获取价格