173D
Vishay Sprague
www.vishay.com
Solid-Electrolyte TANTALEX™ Capacitors,
Axial-Leaded, Molded Case
FEATURES
• Axial through-hole terminations: tin / lead
(SnPb), 100 % tin (RoHS-compliant)
• Miniature axial-lead capacitors available in
5 sizes
Available
Available
• Precision molded in gold colored, flame
retardant, thermosetting epoxy resin
• Laser marked for improved legibility and
tapered end of case provides easy identification of
positive terminal
• Standard orders are lead taped and reeled; orders under
500 are taped only
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
Note
*
This datasheet provides information about parts that are
RoHS-compliant and / or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information / tables in this datasheet for details.
APPLICATIONS
Designed for high performance automotive, industrial and
commercial electronic equipment.
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +85 °C
(to +125 °C with voltage derating)
at +85 °C: leakage current shall not exceed 10 times the
values listed in the Standard Ratings table.
Capacitance Tolerance: at 120 Hz, +25 °C.
at +125 °C: leakage shall not exceed 15 times the values
listed in the Standard Ratings table.
20 %, 10 % standard 5 % available as special
Capacitance Range: 0.10 μF to 330 μF.
Life Test: capacitors shall withstand rated DC voltage
applied at +85 °C for 2000 h and for 1000 h applied
at + 25 °C derated voltage.
Voltage Rating: 2 VDC to 50 VDC
.
Dissipation Factor: at 120 Hz, +25 °C. Dissipation factor,
as determined from the expression 2fRC, shall not exceed
the values listed in the Standard Ratings table.
DC Leakage Current (DCL Max.):
at +25 °C: leakage current shall not exceed the values listed
in the Standard Ratings table.
Following the life test:
1. DCL shall not exceed 125 % of the initial requirements.
2. Dissipation Factor shall meet the initial requirement.
3. Change in capacitance shall not exceed 10 %.
ORDERING INFORMATION
173D
335
X9
006
U
W
E3
MODEL
CAPACITANCE
CAPACITANCE
TOLERANCE
DC VOLTAGE RATING
AT +85 °C
CASE
CODE
PACKAGING
RoHS
COMPLIANT
This is expressed in picofarads.
The first two digits are the
significant figures. The third is
the number of zeros to follow.
X0 = 20 %
X9 = 10 %
*X5 = 5 %
* Special order
This is expressed in volts.
To complete the three-digit
block, zeros precede the
voltage rating.
See
W = tape
and reel
E3 = 100 %
tin termination
(RoHS
Ratings
and Case Blank = ammo
Codes
table
pack
compliant)
Blank = SnPb
termination
DIMENSIONS in inches [millimeters]
L
Max.
0.875 [22.23]
0.875 [22.23]
Min.
Min.
(-)
(+)
D
Max.
Tinned solid leads
Tapered end identifies anode
CASE CODE
D (MAX.)
0.095 [2.41]
0.110 [2.79]
0.180 [4.57]
0.180 [4.57]
0.280 [7.11]
L (MAX.)
0.260 [6.60]
0.290 [7.37]
0.345 [8.76]
0.420 [10.67]
0.550 [13.97]
LEAD DIAMETER
U
V
W
X
0.020 [0.51]
0.020 [0.51]
0.020 [0.51]
0.020 [0.51]
0.025 [0.64]
Y
Revision: 28-Jun-16
Document Number: 40019
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000