生命周期: | Active | Reach Compliance Code: | compliant |
ECCN代码: | EAR99 | HTS代码: | 8536.69.40.30 |
风险等级: | 5.7 | 其他特性: | MNT BKT, GND CLIP & GND INDENT |
主体宽度: | 0.509 inch | 主体深度: | 0.61 inch |
主体长度: | 2.103 inch | 主体/外壳类型: | RECEPTACLE |
连接器类型: | D SUBMINIATURE CONNECTOR | 联系完成配合: | AU ON NI |
触点性别: | MALE | 触点材料: | COPPER ALLOY |
触点模式: | STAGGERED | 触点电阻: | 10 m Ω |
触点样式: | RND PIN-SKT | 介电耐压: | 1000VAC V |
最大插入力: | 3.336 N | 绝缘电阻: | 5000000000 Ω |
绝缘体材料: | GLASS FILLED POLYESTER | 插接触点节距: | 0.109 inch |
安装选项1: | M3 | 安装选项2: | THREADED |
安装方式: | RIGHT ANGLE | 安装类型: | BOARD |
PCB行数: | 2 | 装载的行数: | 2 |
最高工作温度: | 125 °C | 最低工作温度: | -55 °C |
PCB接触模式: | STAGGERED | PCB触点行间距: | 2.8448 mm |
额定电流(信号): | 5 A | 参考标准: | UL |
可靠性: | COMMERCIAL | 外壳面层: | TIN OVER NICKEL |
外壳材料: | STEEL | 子类别: | D Type Connectors |
端子长度: | 0.15 inch | 端子节距: | 2.7686 mm |
端接类型: | SOLDER | 触点总数: | 25 |
撤离力-最小值: | 3.336 N | Base Number Matches: | 1 |
型号 | 品牌 | 获取价格 | 描述 | 数据表 |
163A14709X | CONEC |
获取价格 |
D Type Connector, 25 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, Hole .112-.124, | |
163A14719X | CONEC |
获取价格 |
D Type Connector, 37 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, Hole .112-.124, | |
163A14859X | CONEC |
获取价格 |
D Type Connector, 9 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, #4-40, Receptacle | |
163A14959X | CONEC |
获取价格 |
9pos. SOLDER PIN ANGLED 0.318inch | |
163A14979X | CONEC |
获取价格 |
25pos. SOLDER PIN ANGLED 0.318inch | |
163A15199X | CONEC |
获取价格 |
9 CONTACT(S), MALE-MALE, D SUBMINIATURE CONNECTOR, SOLDER, PLUG-PLUG, ROHS COMPLIANT | |
163A15239X | CONEC |
获取价格 |
D Subminiature Connector, 9 Contact(s), Male-Female, 0.109 inch Pitch, Solder Terminal, #4 | |
163A15269X | CONEC |
获取价格 |
37 CONTACT(S), MALE-FEMALE, D SUBMINIATURE CONNECTOR, SOLDER, PLUG-SOCKET, ROHS COMPLIANT | |
163A15509X | CONEC |
获取价格 |
37 CONTACT(S), MALE-FEMALE, D SUBMINIATURE CONNECTOR, SOLDER, PLUG-SOCKET, ROHS COMPLIANT | |
163A15519X | CONEC |
获取价格 |
D Subminiature Connector, 9+9 Contact(s), Male, 0.109 inch Pitch, Solder Terminal, #4-40, |