1500W Surface Mount
Transient Voltage Suppressor
1.5SMC6.8A - 1.5SMC250CA
1500W Surface Mount Transient Voltage Suppressor
Features
• Low inductance, excellent clamping capability
• Repetition rate(duty cycle): 0.05%
• Fast response time: typically less than 1.0ps from 0V to BV min.
• Typical IR less than 1 µA above 10V
SMC
• High temperature soldering guaranteed 250°C/10 seconds at terminals
• This series is UL recognized under component index. File number E315008
• RoHS Compliant
Mechanical Data
Case:
Epoxy:
JEDEC DO-214AB (SMC) molded plastic over glass passivated junction
Meets UL 94V-0 flammability rating
Terminals:
Polarity:
Solder plated, solderable per MIL-STD-750, Method 2026
Color band denoted positive end (cathode) except Bi-directional
Any
Mounting position:
Weight:
0.007 Ounce, 0.21 gram
Maximum Ratings (T Ambient=25ºC unless noted otherwise)
Symbol
Description
Value
Unit
Conditions
Peak Pulse Power Dissipation
on 10/1000μs Waveform
Non-repetitive current pulse, per FIG.3 and
derated above TA=25° C per FIG.2
Minimum 1500
See Table
200
W
A
PPPM
IPPM
Peak Pulse Current
on 10/1000μs Waveform
Non-repetitive current pulse
8.3ms single half sine-wave superimposed
on rated load, (JEDEC Method) (Note 1,2)
Peak Forward Surge Current
A
IFSM
Operating Junction and Storage
Temperature Range
-55 to 150
° C
TJ,TSTG
Note: 1. Mounted on 8.0mm x 8.0mm copper pads to each terminal
2. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle= 4 pulses per minutes maximum.
Rev. D/AH 2008-02-25
Page 1 of 5
TAITRON COMPONENTS INCORPORATED www.taitroncomponents.com
Tel: (800)-TAITRON
Fax: (800)-TAITFAX
(800)-824-8766 (661)-257-6060
(800)-824-8329 (661)-257-6415