150D
Vishay Sprague
Solid-Electrolyte TANTALEX® Capacitors
Hermetically-Sealed, Axial-Lead
FEATURES
• Terminations: Tin/lead (SnPb),
100 % Tin (RoHS compliant)
Available
• These high performance, hermetically-sealed
RoHS*
TANTALEX® capacitors have set the standard
for solid-electrolyte tantalum capacitors for
more than three decades.
COMPLIANT
• High capacitance, low DCL, low dissipation factor and
exceptional operating stability.
• Performance and reliability have been proven in
commercial, industrial and military applications.
• Available in four case codes and capacitors and are
supplied with plastic-film insulation.
• Terminals are solid, tinned nickel wire leads.
• The Military equivalent to the 150D is the CSR13 which is
qualified to MIL-C-39003/01.
PERFORMANCE CHARACTERISTICS
Operating Temperature: - 55 °C to + 85 °C.
(To + 125 °C with voltage derating.)
At + 85 °C: Leakage current shall not exceed 10 times the
values listed in the Standard Ratings Tables.
At +125 °C: Leakage shall not exceed 15 times the values
listed in the Standard Ratings Tables.
Capacitance Tolerance: At 120 Hz, + 25 °C. 20 %,
10 % standard. 5 % available as special.
Life Test: Capacitors shall withstand rated DC voltage
applied at + 85 °C for 2000 hours or derated DC voltage
applied at + 125 °C for 1000 hours
Dissipation Factor: At 120 Hz, + 25 °C. Dissipation factor,
as determined from the expression 2πfRC, shall not exceed
the values listed in the Standard Ratings Tables.
Following the life test:
DC Leakage Current (DCL Max.):
1. DCL shall not exceed 125 % of the initial requirement.
2. Dissipation Factor shall meet the initial requirement.
At + 25 °C: Leakage current shall not exceed the values
listed in the Standard Ratings Tables.
3. Change in capacitance shall not exceed 5 %.
DIMENSIONS in inches [millimeters]
1.500 0.250
[38.10 6.35]
1.500 0.250
D
[38.10 6.35]
DIA.
L
0.047 [1.19] MAX.
0.125 [3.18] MAX.
SOLID TINNED
NICKEL LEADS
J
MAX.
WITH INSULATING SLEEVE**
CASE CODE
LEAD SIZE
J (MAXIMUM)
AWG
NO.
NOMINAL
D
L
DIAMETER
0.135 0.01ꢀ
[3.43 0.41]
0.185 0.01ꢀ
[4.70 0.41]
0.289 0.01ꢀ
[7.34 0.41]
0.351 0.01ꢀ
[8.92 0.41]
0.28ꢀ 0.031
[7.2ꢀ 0.79]
0.474 0.031
[12.04 0.79]
0.ꢀ8ꢀ 0.031
[17.42 0.79]
0.78ꢀ 0.031
[19.9ꢀ 0.79]
0.422
[10.720]
0.ꢀ10
[15.490]
0.822
[20.880]
0.922
[23.420]
0.020
A
B
R
S
24
24
22
22
[0.51]
0.020
[0.51]
0.025
[0.ꢀ4]
0.025
[0.ꢀ4]
Notes
* Pb containing terminations are not Rohs compliant, exemptions may apply
** When a shrink-fitted insulation is used, it shall lap over the ends of the capacitor body
www.vishay.com
1
For technical questions, contact: tantalum@vishay.com
Document Number: 40015
Revision: 11-May-07