Datasheet > 1490540-1

1490540-1

更新时间： 2024-11-08 01:07:35

品牌	Logo	应用领域
MACOM		/
页数	文件大小	规格书
6页	320K
描述
This instruction sheet provides information on product application and a maintenance and inspection

阅读下载

中文翻译

获取价格

如果您发现信息不准确，欢迎纠错

1490540-1 数据手册

Figure 1

This instruction sheet provides information on product

application and a maintenance and inspection

procedure for the crimping dies listed in Figure 1. The

dies are used in Hydraulic Crimping Head 1490746–1

and Hydraulic Hand Tool 1490749–1. For detailed

information on the crimping head and hand tool, refer

to the instructions packaged with these tools.

These dies are designed to crimp AMPLI–BOND and

PLASTI–GRIP terminals on wire sizes 8 to 2 AWG,

and Pre–Insulated AMPOWER terminals on wire size

2 AWG. Dies are coated with a preservative to

prevent rust and corrosion. Wipe preservative from

dies, particularly from crimping areas.

1. Refer to the chart in Figure 1 and verify that you

have the proper die set for the terminal and wire

size being used.

2. Before inserting dies in head, loosen socket

head cap screws holding insulation crimping

section of dies in place. See Figure 1. If screws are

not loosened, dies may not fit into head of tool

because of close tolerance.

3. Release the button and rock the die

back–and–forth until the nest snaps in place.

12 3 4 5 6

中文翻译

下载PDF

型号	品牌	获取价格	描述	数据表
1490555-1	MACOM	获取价格	The die assemblies consist of stationary dies and moving dies
1490556-1	MACOM	获取价格	The die assemblies consist of stationary dies and moving dies
1490557-1	MACOM	获取价格	The die assemblies consist of stationary dies and moving dies
1490597-1	MACOM	获取价格	Depress the upper release button located in t
1490597-1	TE	获取价格	Crimping Die Assemblies
1490598-1	MACOM	获取价格	Depress the upper release button located in t
1490598-1	TE	获取价格	Crimping Die Assemblies
1490599-1	MACOM	获取价格	Depress the upper release button located in t
1490599-1	TE	获取价格	Crimping Die Assemblies
1490600000	WEIDMULLER	获取价格	Cable glands