RWZCONNECTOR(Power supply system
structure reinforced type)
Disconnectable Crimp style Wire-to wire connectors
Specifications –––––––––––––––––––
• Current rating: The table below shows the current rating for each
combination of number of circuits and wire.
No. of
circuits
Note: Notes on branch current in parallel connection.
Do not branch in parallel current which exceeds the rated current
to plurality of circuits. If branched in parallel, current imbalance
or other problems may develop. If it is unavoidable to branch
current in parallel, be sure to control imbalance during applying
current. Design the circuits without causing imbalance and
provide an extra margin for current.
• Voltage rating: 250 V AC, DC
• Temperature range: -25˚C to +85˚C
(including temperature rise in applying
electrical current)
• Contact resistance: Initial value/ 10 mΩ max.
This is the power supply system drawer
connector which realized excellent
toughness and durability by performing the
secure guide and positioning when mating
with assembled metal pin to the receptacle.
In addition to the ease of robust design of
the connection in equipment, provide
safety and security.
After environmental tests/ 20 mΩ max.
• Insulation resistance: 500 MΩ min.
• Withstanding voltage: 1,500 VAC/minute
• Applicable wire: Conductor size/ AWG #24 to #14
Insulation O.D. / 1.4 to 3.6 mm
• Mounting method: Screw
* In using the products, refer to "Handling Precaution for Terminal
and Connector" described on our website (Technical documents
of Product information page).
• Floating amount: ± 0.5 mm
• Space saving design
• High reliability contact
* Contact JST for details.
• Using the standard M4 screws to securing board
* RoHS2 Compliance
1