Datasheet > 135D106X0100C2

135D106X0100C2

更新时间： 2024-11-07 05:57:51

品牌	Logo	应用领域
威世 - VISHAY		电容器钽电容器
页数	文件大小	规格书
6页	100K
描述
Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum Hermetic Seal for - 55 °C to + 200 °C Operation

阅读下载

中文翻译

获取价格

技术参数
数据手册

如果您发现信息不准确，欢迎纠错

135D106X0100C2 技术参数

是否无铅：	含铅	是否Rohs认证：	不符合
生命周期：	Active	包装说明：	AXIAL LEADED
Reach Compliance Code：	compliant	ECCN代码：	EAR99
HTS代码：	8532.21.00.20	风险等级：	5.61
电容：	10 µF	电容器类型：	TANTALUM CAPACITOR
直径：	5.16 mm	介电材料：	TANTALUM (WET)
ESR：	5900 m Ω	JESD-609代码：	e0
漏电流：	0.003 mA	长度：	11.51 mm
安装特点：	THROUGH HOLE MOUNT	负容差：	20%
端子数量：	2	最高工作温度：	200 °C
最低工作温度：	-55 °C	封装形状：	TUBULAR PACKAGE
封装形式：	Axial	包装方法：	TRAY, PLASTIC
极性：	POLARIZED	正容差：	20%
额定（直流）电压（URdc）：	100 V	纹波电流：	800 mA
表面贴装：	NO	端子面层：	Tin/Lead (Sn/Pb)
端子形状：	WIRE	Base Number Matches：	1

135D106X0100C2 数据手册

135D

Vishay

Wet Tantalum Capacitors Tantalum-Case with Glass-to-Tantalum

Hermetic Seal for - 55 °C to + 200 °C Operation

FEATURES

• Terminations: standard tin/lead (SnPb),

100 % Tin (RoHS compliant) available

Pb-free

Available

• Standard and extended ratings

RoHS*

electrolytic

• Model

135D

tantalum-case

COMPLIANT

capacitors incorporate the advantages of all the

varieties of electrolytic capacitors and eliminate most of the

disadvantages. These units have a 3 volt reverse voltage

capability at + 85 °C and a higher ripple current capability

than any other electrolytic type with similar combinations of

capacitance and case size.

• Designed for the aerospace applications, this capacitor

was developed under partial sponsorship of the Marshall

Space Flight Center, National Aeronautics and Space

Administration. The capacitors have a high resistance to

damage from shock and vibration. Extended range ratings

and high temperature designs areavailable.

• Model 135D capacitors are commercial equivalents of

Tansitor Style; AQ, AR, HAQ, HAR, Mallory-NACC Style;

TLT, TXT, THT, THX and Military Style CLR79 and CLR81,

designed to meet the performance requirements of Military

Specification MIL-PRF-39006/22/25. Capacitors to meet

MILPRF- 39006/22/25 should be ordered by part numbers

shown in that specification.

PERFORMANCE CHARACTERISTICS

Operating Temperature: - 55 °C to + 85 °C.

(To + 200 °C with voltage derating.)

Life Test: Capacitors are capable of withstanding a 2000 h

life test at a temperature of + 85 °C or + 125 °C at the

applicable rated DC working voltage.

Capacitance Tolerance: At 120 Hz, + 25 °C.

standard. 10 %, 5 % available as special.

20 %

Following life test:

1. DCL, measured at + 85 °C rated voltage, shall not be in

excess of the original requirement.

DC Leakage Current (DCL Max.): At + 25 °C and above:

Leakage current shall not exceed the values listed in the

Standard Ratings Tables.

2. The equivalent series resistance shall not exceed 150 %

of the initial requirement.

3. Change in capacitance shall not exceed 10 % from the

initial measurement.

ORDERING INFORMATION

135D

306

006

MODEL

CAPACITANCE

TOLERANCE

DC VOLTAGE RATING CASE CODE

STYLE NUMBER

RoHS COMPLIANT

AT + 85 °C

This is expressed

in picofarads. The

first two digits are

the significant

figures. The third

is the number of

zeros to follow

X0 = 20 %

X9 = 10 %

X5 = 5 %

This is expressed in volts. See Ratings

Standard

0 = No outer tube.

2 = Outer polyesterfilm

insulation.

E3 = 100 % tin

termination (RoHS

compliant design)

Blank = SnPb

To complete the

three-digit block, zeros

precede the voltage

rating. A decimal point is

indicated by an “R”

(6R3 = 6.3 V)

and

Case Codes

Table

termination

High Temperature

8 = No outer tube.

6 = High temperature film

insulation (above + 125 °C)

(standard design)

Note

Packaging: The use of formed plastic trays for packaging these axial lead components is standard. Tape and reel is not recommended due to

the unit weight.

* Pb containing terminations are not RoHS compliant, exemptions may apply

www.vishay.com

For technical questions, contact: tantalum@vishay.com

Document Number: 40024

Revision: 10-Oct-08

12 3 4 5 6

中文翻译

下载PDF

与135D106X0100C2相关器件

型号	品牌	获取价格	描述	数据表
135D106X0100C2E3	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 100V, 20% +Tol, 20% -Tol, 10uF, Through Hol
135D106X9050C6	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 50V, 10% +Tol, 10% -Tol, 10uF, Through Hole
135D107X0010F2	VISHAY	获取价格	Wet Tantalum Capacitors Tantalum-Case with Gl
135D107X0010F2E3	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 10V, 20% +Tol, 20% -Tol, 100uF, Through Hol
135D107X0015C2	VISHAY	获取价格	Wet Tantalum Capacitors Tantalum-Case with Gl
135D107X0015C2E3	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 15V, 20% +Tol, 20% -Tol, 100uF, Through Hol
135D107X0025F2	VISHAY	获取价格	Wet Tantalum Capacitors Tantalum-Case with Gl
135D107X0025F2E3	VISHAY	获取价格	Tantalum Capacitor, Polarized, Tantalum (wet), 25V, 20% +Tol, 20% -Tol, 100uF, Through Hol
135D107X0030T2	VISHAY	获取价格	Wet Tantalum Capacitors Tantalum-Case with Gl
135D107X0050F2	VISHAY	获取价格	Wet Tantalum Capacitors Tantalum-Case with Gl

与135D106X0100C2相关文章

英伟达新AI芯片Rubin或提前半年亮相
2024-11-05

19
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
2024-11-05

16
三星深化印度制造布局，供应链本地化进程加速
2024-10-29

39
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
2024-10-29

37

产品中心

服务支持

精选活动

关于我们

帮助中心

135D106X0100C2

135D106X0100C2 技术参数

135D106X0100C2 数据手册

与135D106X0100C2相关器件

与135D106X0100C2相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

135D106X0100C2

135D106X0100C2 技术参数

135D106X0100C2 数据手册

与135D106X0100C2相关器件

与135D106X0100C2相关文章

您还可以找

您在本页遇到什么问题？