Automotive MLCC
Automotive
GENERAL DESCRIPTION
AVX Corporation has supported the Automotive Industry requirements for
Multilayer Ceramic Capacitors consistently for more than 10 years. Products
have been developed and tested specifically for automotive applications and
all manufacturing facilities are QS9000 and VDA 6.4 approved.
As part of our sustained investment in capacity and state of the art
technology, we are now transitioning from the established Pd/Ag electrode
system to a Base Metal Electrode system (BME).
AVX is using AECQ200 as the qualification vehicle for this transition. A detailed
qualification package is available on request and contains results on a range
of part numbers including:
• X7R dielectric components containing BME electrode and copper
terminations with a Ni/Sn plated overcoat.
• X7R dielectric components, BME electrode with epoxy finish for conduc-
tive glue mounting.
• X7R dielectric components BME electrode and soft terminations with a
Ni/Sn plated overcoat.
• NP0 dielectric components containing Pd/Ag electrode and silver termina-
tion with a Ni/Sn plated overcoat.
HOW TO ORDER
0805
5
A
104
K
4
2
A
T
Size
0402
0603
0805
1206
1210 100V = 1
1812 200V = 2
500V = 7
Voltage Dielectric
Capacitance Capacitance
Failure Rate
4 = Automotive
Packaging
2 = 7" Reel
4 = 13" Reel
Special Code
A = Std. Product
Terminations
T = Plated Ni and Sn
Z = FLEXITERM®**
Code (In pF)
2 Significant
Tolerance
F = 1ꢀ
(≥10pF)*
G = 2ꢀ
(≥10pF)*
J = 5ꢀ
(≤1μF)
10V = Z
16V = Y
25V = 3
50V = 5
NP0 = A
X7R = C
X8R = F
Digits + Number
of Zeros
e.g. 10μF = 106
U = Conductive Epoxy**
**X7R & X8R only
K = 10ꢀ
M = 20ꢀ
*NPO only
Contact factory for availability of Tolerance Options for Specific Part Numbers.
NOTE: Contact factory for non-specified capacitance values.
0402 case size available in T termination only.
COMMERCIAL VS AUTOMOTIVE MLCC PROCESS COMPARISON
Commercial
Automotive
Administrative
Design
Standard Part Numbers.
Specific Automotive Part Number. Used to control
supply of product to Automotive customers.
No restriction on who purchases these parts.
Minimum ceramic thickness of 0.020"
Side & End Margins = 0.003" min
As per EIA RS469
Minimum Ceramic thickness of 0.029" (0.74mm)
on all X7R product.
Dicing
Side & End Margins = 0.004" min
Cover Layers = 0.005" min
Lot Qualification
(Destructive Physical
Analysis - DPA)
Increased sample plan –
stricter criteria.
Visual/Cosmetic Quality
Application Robustness
Standard process and inspection
100% inspection
Standard sampling for accelerated
wave solder on X7R dielectrics
Increased sampling for accelerated wave solder on
X7R and NP0 followed by lot by lot reliability testing.
All Tests have Accept/Reject Criteria 0/1
38
5秒后页面跳转
全球首块英伟达H200交付 黄仁勋“送货上门”
常用8脚开关电源芯片型号大全
74HC04芯片引脚图及功能、应用电路图讲解
CR6842芯片参数、引脚配置、应用电路图详解
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
