Document 1524-1
Common Mode Choke 1210CANbus
Halogen
Free
• Designed for common mode noise suppression on CAN
or CAN FD in automotive or general industrial automation
applications
• 51 µH value meets IEC 6228-3 (CDV Annex D) requirements
• Can be used for FlexRay automotive bus system
• Filters a broad frequency range of common mode noise
• Low profile 1210 footprint: 3.30 × 2.67 × 3.0 mm
AEC
+
Q200 125°C
Core material Ferrite
Environmental RoHS compliant, halogen free
Weight 100 – 120 mg
Terminations RoHS compliant matte tin over nickel over silver-
palladium-glass frit.
Ambient temperature –40°C to +125°C with Irms current.
Maximum PartTemperature +150°C
Storage temperature Component: –40°C to +150°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at +260°C,
parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85%
relative humidity)
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Inductance2
–30% +50%
(μH)
DCR
max3
(Ohms)
Isolation4 Irms5
Part number1
(Vrms)
(mA)
1210CAN-113NR_
1210CAN-223NR_
1210CAN-513NR_
1210CAN-104NR_
11
22
51
0.45
0.60
1.35
3.70
250
250
250
250
300
300
200
100
100
1. When ordering, please specify packaging code:
1210CAN-104NRC
Packaging: C = 7 machine-ready reel. EIA-481 embossed plastic
tape (750 parts per full reel). Quantities less than full
reel available: in tape (not machine ready) or with
leader and trailer ($25 charge).
D = 13 machine-ready reel. EIA-481 embossed plastic tape.
Factory order only, not stocked (3000 parts per full reel).
2. Inductance is per winding, measured at 100 kHz, 0.1 Vrms, 0 Adc using
an Agilent/ HP 4263B LCR meter and a Coilcraft CCF 1190 fixture.
3. DCR is specified per winding, measured on a Keithley 580 micro-
ohmmeter and a Coilcraft CCF 858 fixture.
4. Winding to winding isolation (hipot) tested for one minute.
5. Current per winding that causes a 25°C rise from +125°C ambient.
6. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
inches
mm
Dimensions are in
Packaging 750/7″ reel; 3000/13″ reel; Plastic tape: 12 mm wide,
0.25 mm thick, 8 mm pocket spacing, 2.72 mm pocket depth
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
Document 1524-1 Revised 06/11/21
© Coilcraft Inc. 2023
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.