Hybrid Connector
17 TW SERIES
SPECIFICATIONS:
MATERIALS AND PLATINGS
Shells
Steel with tin plating or yellow chromate
with or without grounding dimples
Insulators
Signal Contacts
Female
Male
Plating
High temperature black thermoplastic
Machined bronze
Machined brass
16µ"(.40µm) or 30µ"(.76µm) gold
over 79µ"(1.97µm) nickel
Coax Contacts
Female
Machined bronze
Male
Machined brass
Plating
Inner conductor: 16µ"(.40µm) gold
or 30µ"(.76µm) gold over 79µ"(1.97µm) nickel
Outer ring: 10µ"(.25µm) gold over 79µ"(1.97µm) nickel
Tinned. (Solder cup and crimp terminations are gold flash.)
Amphenol’s 17TW series hybrid
D-Subminiature connectors are
available with power, coax, high
voltage and signal contacts
assembled in the same connector
body. These connectors are
supplied with screw-machined
contacts which are fixed in the
insulator.
Terminations
Power Contacts
Female
Male
Plating
Machined bronze
Machined brass
Contacts: 16µ"(.40µm) gold or 30µ"(.76µm) gold
over 79µ"(1.97µm) nickel
Tinned. (Solder cup and crimp terminations are gold flash.)
Steel with tin plating
Terminations
Brackets
Front Jackscrews Brass with tin plating or yellow chromate
Rear Clinch Nuts Brass with tin plating or yellow chromate
Boardlocks:
Stand-offs
Bronze with tin plating
Brass with tin plating
The board-mount product
offering includes straight and
right-angle terminations. The
cable connectors are available in
crimp and solder terminations.
These connectors are compatible
with the infra-red reflow
soldering process. The 17TW
series offers eighteen housing
configurations in five shell sizes.
ELECTRICAL DATA
Current Rating: Signal Contacts
Power Contacts: PCB, Solder-Cup, Crimp 10 to 40 amps
0.5 amps
Current Rating: Signal & Power Contacts 300 VRMS at 50 Hz
7.5 amps with 10 amp peaks
Coax Contacts
Coax Contacts Frequency range:
Attenuation:
150 VRMS at 50 Hz
0 -1 GHz
0.2 dB
1.4 (+0.04/GHz)
50 Ohms
≥ 1000V R.M.S. at 50Hz
≥ 5000 megaohms at 500 V D.C.
≤5 milliohms
V.S.W.R.:
Characteristic Impedance
Dielectric Withstanding Voltage
Insulation Resistance
Contact Resistance
Shell Resistance (electrical grounding) ≤1 milliohm
• Industrial
• Telecom
CLIMATIC DATA
Shell Resistance (electrical grounding) ≤1 milliohm
Operating Temperature
• Any industry standard
I / O connections
67°F (-55°C) to 311°F (+155°C)
with peaks up to 356°F (180°C)
56 days 104°F (40°C) at 95% RH
48 hours
Damp Heat
Salt Spray
MECHANICAL DATA
Contact Retention Force in Dielectric Material >40 N
Maximum Mating and Unmating Force
with dimples
A size: 80 N B size: 100 N C size: 150 N
D size: 180 N E size: 70 N
without dimples
A size: 50 N B size: 80 N C size: 120 N
D size: 160 N E size: 30 N
Process Compatibility IR - air convection: 500°F (260°C) for 20 seconds
Soldering iron: 500°F (260°C) for 30 seconds
Mating Cycles
≥ 200 (16µ"(.41µm) gold) ≥ 500 (30µ"(.76µm) gold)
Blind Mating System Available upon request
Available with locking accessories, consult factory
Polarization
Derating Curves for Power Contacts: see page 51
Pull-out Force for Crimped Contacts: see page 51
Approvals: UL - File number: E 64911 / CSA - File number: LR 57744
Shell Dimensions: See page 64
TELEPHONE: (416) 754-5656 FAX: (416) 754-8668 E-MAIL: SALES@AMPHENOLCANADA.COM
37