Datasheet > 115JP300C101C1

115JP300C101C1

更新时间： 2022-04-23 23:00:11

品牌	Logo	应用领域
西迪斯 - CTS		电阻器可变电阻器
页数	文件大小	规格书
3页	475K
描述
Commercial 3/4inch (19mm) Diameter, 2 watt Wirewound Variable Resistor

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

115JP300C101C1 数据手册

Series 115

Commercial 3/4"

(19mm) Diameter,

2 watt Wirewound

Variable Resistor

Features

• Fully enclosed construction

• Four mounting styles

• Long rotational life

• Optional grounded or insulated rotor

construction

• Incorporated fixed resistor available

• Available with nylon shaft

• Interchangeable mounting with

CTS series 110 preset potentiometers

• RoHS compliant

Electrical and Mechanical Specifications

Resistor Adjustment

Resistance Range

Standard: Cross slot provided in rotor for screwdriver

adjustment.

Special: Molded nylon, screwdriver-slotted shafts which

are integral with rotor are available in many lengths

in increments of 1/8" (3.2mm) up to a maximum

of 2" (50.8mm).Consults with the factory

1 ohm through 20K ohms (linear taper)

Resistance Tolerance

Standard: ±20%

Special: ±5% or ±10%

Power Rating, Watts

2 watts @ 55°C derated to no load @ 105°C

mounted on steel panel

1.5 watts @ 55°C derated to no load @ 105°C,

mounted on bakelite panel

Mounting Types Available

Printed circuit mounted: Type 115 P

Twist tab mounted:

Snap-in mounted:

Rivet ear mounted:

Type 115 T

Type 116 E

Type 117 R

Voltage Rating

Terminals to case (insulated types only)

High pot test, one minute — 900 VAC

Operating maximum — 500 VDC

Across end terminals

Terminal Information

Grounded Construction — The grounded construction is

supplied without a center terminal and the contactor is

connected to the case. This construction can be furnished

with one end terminal at either end of the resistance

element or with terminals at both ends of the element.

Determined by resistance value and wattage rating

Resistance Taper

Standard: Linear taper only

Insulated Construction — The contactor is insulated from the

base and connected to the center terminal on the insulated

construction. This construction can be supplied with the

center terminal and one end terminal at either end of the

resistance element or with the center terminal and terminals

at both ends of the resistance element.

Taps Available

None

Incorporated Fixed Resistor

A fixed resistor can be incorporated in the Series 115

at the end of CW or CCW rotation to a minimum of 15%

of the total resistance value. The rotation is shortened

by an amount proportional to the ratio of the fixed resistor

to the total resistance value.

Rotational Torque

1/2 to 10 in-oz. (36 – 720 gf-cm)

Stop Strength

4 in-oz. (4.6 Kgf-cm)

Angle of Rotation

Tatol Rotation: 270° ± 5°

9/30/06

1 - 3

CTS Electronic Components

www.ctscorp.com

12 3

下载PDF

与115JP300C101C1相关器件

型号	品牌	描述	获取价格	数据表
115JP300C101D1	CTS	Commercial 3/4 (19.05mm) diameter, 2 watt variable resistor	获取价格
115JP300C102A1	CTS	Commercial 3/4 (19.05mm) diameter, 2 watt variable resistor	获取价格
115JP300C102B1	CTS	Commercial 3/4 (19.05mm) diameter, 2 watt variable resistor	获取价格
115JP300C102C1	CTS	Commercial 3/4inch (19mm) Diameter, 2 watt Wirewound Variable Resistor	获取价格
115JP300C102D1	CTS	Commercial 3/4 (19.05mm) diameter, 2 watt variable resistor	获取价格
115JP300C103A1	CTS	Trimmer, Wire Wound, 2W, 10000ohm, 10% +/-Tol	获取价格