MODEL: 10JRE
High-density Signal Conditioners 10-RACK
POWER INPUT
DC Power
R: 24 V DC
4-WIRE RTD TRANSMITTER
(field-programmable)
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Functions & Features
• Accepting direct input from a 4-wire Pt 1000 Ω and
providing a standard process signal
• Microprocessor based
[2] OPTIONS (multiple selections)
Burnout
blank: Upscale burnout
• Field-programmable temperature range
• Linearization
/BL: Downscale burnout
Other Options
• Burnout protection
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
RELATED PRODUCTS
• Programming Unit (model: PU-2x)
• PC configurator software (model: JXCON)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
MODEL: 10JRE-2[1]0-R[2]
ORDERING INFORMATION
• Code number: 10JRE-2[1]0-R[2]
Specify a code from below for each [1] and [2].
(e.g. 10JRE-2A0-R/BL/Q)
GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw
terminals at the front and via card-edge connector at the
rear; terminal cover provided
•Temperature range (e.g. 0 – 300 K)
• Measuring range (e.g. 100 – 1000 Ω)
• Linearization data (max. 16 points)
Use Ordering Information Sheet (No. ESU-1669) to specify
linearization data when the I/O signals are non-linear.
• Specify the specification for option code /Q
(e.g. /C01)
Connection
Input: M3.5 screw terminals (torque 0.8 N·m)
Output: Card-edge connector and M3.5 screw terminals
(torque 0.8 N·m)
Power input: Supplied from card-edge connector
Screw terminal: Nickel-plated steel
INPUT RTD (4-wire)
2: Pt 1000 Ω
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Linearization: 16 points max. within the range of -15.00 –
+115.00 % input or output; represented as percentage of
full-scale
[1] OUTPUT 1
Current
A: 4 – 20 mA DC (Load resistance 600 Ω max.)
Voltage
Adjustments: Programming Unit (model: PU-2x);
linearization data, input range, zero and span, simulating
output, etc.
6: 1 – 5 V DC (Load resistance 500 Ω min.)
(Refer to the users manual of JXCON for the adjustments
configurable with JXCON)
OUTPUT 2
0: None
http://www.m-system.co.jp/
10JRE SPECIFICATIONS
ES-0815 Rev.12 Page 1/3