MODEL: 10DU
High-density Signal Conditioners 10-RACK
[1] OPTIONS
blank: none
/Q: With options (specify the specification)
CURRENT LOOP SUPPLY
(10 – 50 mA loop)
Functions & Features
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
• Powering a 10 – 50 mA DC current loop
• Isolation
• Shortcircuit protection
• Applicable to smart transmitters
/C02: Polyurethane coating
/C03: Rubber coating
Typical Applications
GENERAL SPECIFICATIONS
Construction: Rack-mounted; terminal access via screw
terminals at the front and via card-edge connector at the
rear; terminal cover provided
• Various 2-wire transmitters
Connection
Input: M3.5 screw terminals (torque 0.8 N·m)
Output: Card-edge connector and M3.5 screw terminals
(torque 0.8 N·m)
Power input: Supplied from card-edge connector
Screw terminal: Nickel-plated steel
Housing material: Flame-resistant resin (black)
Isolation: Input to output to power
Overrange output: Approx. -10 to +120 % at 1 – 5 V
Zero adjustment: -5 to +5 % (front)
Span adjustment: 95 to 105 % (front)
MODEL: 10DU–H60-R[1]
SUPPLY OUTPUT
Output voltage: 24 – 28 V DC with no load
ORDERING INFORMATION
• Code number: 10DU-H60-R[1]
Specify a code from below for [1].
(e.g. 10D-H60-R/Q)
Current rating: ≤ 55mA DC
• Shortcircuit Protection
Current limited: Approx. 65 mA
Protected time duration: No limit
• Specify the specification for option code /Q
(e.g. /C01)
INPUT SPECIFICATIONS
Equivalent input impedance: Approx. 100 Ω at 50 mA
INPUT
Current
6.0
approx. 6.0
H: 10 – 50 mA DC
5.0
approx.
4.8
OUTPUT 1
Voltage
4.0
6: 1 – 5 V DC (Load resistance 50 kΩ min.)
10
30
50
INPUT CURRENT [mA]
OUTPUT 2
0: None
OUTPUT SPECIFICATIONS
The output goes below 0 % when the input is open.
POWER INPUT
DC Power
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
http://www.m-system.co.jp/
10DU SPECIFICATIONS
ES-0828 Rev.7 Page 1/3