1091M Series Non-Relampable
LED Indicator Lights
All dimensions
in inches.
Ø.630
Solid-state indicator lights complete with built-in current-limiting
resistor and rectifier diode.
.380
Mounting: Will snap-fit into Ø.500/.505 hole in panels .020/.100
thick. Push-on speednut SN0461 also available.
Mounting hole pattern on page SP2.
Wire Leads: No. 22 AWG (105°C) 4.40/4.80 long,
stripped .430/.570
1.130
Lens: Polycarbonate
Anode(+): Red lead
Ø.500
MAX.
Bezel: Polished stainless steel.
Housing: White Nylon
To use 24V model: Beyond 32VAC add
30 ohms per volt; beyond 24 VDC add 50 ohms per volt.
Use 1/2W resistor up to 50V; 1W resistor for 50V to 70V;
2W resistor for 75V to 125V. Do not use beyond 125V.
LE D Solid S tate Indicator
Model No.
(6V)
1091M1-6V
1091M5-6V
-
Model No.
(24V)
1091M1-24V
1091M5-24V
1091M7-24V
Model No.
Model No.
(12V)
1091M1-12V
1091M5-12V
1091M7-12V
Lens Color
R ed
Green
Yellow
Internal R esistor
(ohms)
(105-125 VAC*)
1091M1-125VAC
1091M5-125VAC
1091M7-125VAC
(2) 3.9K 1/2W*
*125 VAC supplied with
6" white wire, stripped 1/2"
with external 3.9K 1/2 watt
resistor attached to one lead,
covered with shrink tubing
insulation.
150
390
1000
(One Internal)
* Also incorporates 1N4004
(400 P.I.V.) rectifier diode.
Voltage Table
VAC
Incorporates LE D*
4304H1
Lens Color
R ed
Nominal
VDC
Green
Yellow
4304H5
6V
12V
24V
3.5 to 6.5
6 to 13.5
12 to 24
5 to 11
10 to 20
22 to 32
4304H7
125 VAC
-
105 to 125
Compliance & approvals
Compliance & Approvals
the first call for illuminated components
www.vcclite.com
1.800.522.5546
08/16 Rev 1