Document 219-1
Shielded High SRF Inductors
–
1008PS
• Higher SRF than our other power inductors
• High inductance with tight tolerance
• Excellent current handling for a part this size
Core material Ceramic/Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Weight 122– 132 mg
Ambient temperature –40°C to +105°C with Irms current, +105°C
to +145°C with derated current
Storage temperature Component: –40°C to +145°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 750/7″ reel; 2500/13″ reel Plastic tape: 12 mm wide,
0.3 mm thick, 8 mm pocket spacing, 3.3 mm pocket depth
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Isat(A)6
Irms(A)7
1. When ordering, specify packaging code:
±118PS-±15KLC
Packaging: C= 7″ machine-ready reel. EIA-481 em-
bossed plastic tape (750 parts per full
reel).
Inductance
±±102
DCR4
max
SRF5
Part
Q
typ ±10 210 310 21°C 41°C
number1
(µH)
min3 (Ohms) (MHz) drop drop drop rise rise
1008PS-102KL_
1008PS-152KL_
1008PS-182KL_
1008PS-222KL_
1008PS-272KL_
1.0
1.5
1.8
2.2
2.7
35
35
35
36
38
26
38
38
38
38
38
38
40
45
45
45
45
45
45
50
0.05 387
0.06 276
0.09 253
0.10 228
0.14 207
0.84 199
0.26 185
0.35 160
0.36 150
0.58 120
3.5
2.7
2.3
2.4
1.6
1.5
1.5
1.3
1.5
1.3
3.9
3.2
2.7
2.8
2.0
1.6
1.8
1.6
1.7
1.5
4.2 1.4
3.5 1.4
2.0
2.0
3.0 0.98 1.4
B= Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D= 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory order
only, not stocked (2500 parts per full
reel).
3.1 1.2
2.3 1.0
1.7
1.4
1008PS-332KL_
1008PS-392KL_
1008PS-472KL_
1008PS-562KL_
1008PS-682KL_
3.3
3.9
4.7
5.6
6.8
1.6 0.51 0.67
2.0 0.82 1.1
1.7 0.70 0.95
1.8 0.66 0.87
1.6 0.45 0.76
2. Inductance measured at 100 kHz, 0.1 Vrms, using
Coilcraft SMD-A fixture in Agilent/HP 4263B impedance
analyzer or equivalent.
3. Q measured at 1 MHz using an Agilent/HP 16193 test
fixture and an Agilent/HP 4291 or equivalent.
4. DCR measured on micro-ohmmeter and Coilcraft
CCF840 test fixture.
5. SRF measured using a Coilcraft SMD-D test fixture and
an Agilent/HP 8753D network analyzer or equivalent.
6. DC current at which the inductance drops the specicfied
amount from its value without current.
7. Current that causes the specified temperature rise from
25°C ambient.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
1008PS-103KL_
1008PS-153KL_
1008PS-223KL_
1008PS-333KL_
1008PS-393KL_
10
0.92 105
0.84 1.0
1.1 0.40 0.59
15
22
33
39
1.15
1.40
1.61
1.85
2.5
3.8
4.3
5.8
6.3
35
26
20
16
19
12
0.81 0.87 0.90 0.36 0.51
0.67 0.75 0.79 0.33 0.44
0.53 0.61 0.68 0.30 0.42
0.49 0.56 0.60 0.28 0.39
0.47 0.52 0.54 0.23 0.31
0.38 0.42 0.45 0.21 0.26
1008PS-473KL_
1008PS-683KL_
1008PS-823KL_
47
68
82
9.0 0.33 0.38 0.42 0.18 0.26
7.0 0.35 0.38 0.39 0.16 0.20
7.0 0.30 0.33 0.35 0.14 0.20
5.8 0.27 0.30 0.33 0.13 0.18
5.0 0.21 0.24 0.27 0.13 0.17
3.8 0.19 0.21 0.23 0.11 0.15
3.1 0.14 0.17 0.19 0.10 0.13
2.8 0.13 0.15 0.17 0.093 0.12
1008PS-104KL_ 100
1008PS-124KL_ 120
1008PS-154KL_ 150
1008PS-224KL_ 220
1008PS-334KL_ 330
1008PS-474KL_ 470
1008PS-564KL_ 560
50
7.5
55 10.0
55 11.5
55 16.3
55 18.1
1008PS-684KL_ 680
1008PS-824KL_ 820
1008PS-105KL_ 1000
55 24.0
45 26.0
45 29.0
2.5 0.11 0.15 0.17 0.073 0.11
1.5 0.10 0.12 0.13 0.073 0.10
2.0 0.11 0.13 0.14 0.070 0.10
Document 219-1 Revised 03/14/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.