GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSORS
Breakdown Voltage
Peak Pulse Power
6.8 to 440 Volts
1500 Watts
1.5KE6.8 THRU 1.5KE440CA(GPP)
1.5KE6.8J THRU 1.5KE440CAJ(OPEN JUNCTION)
FEATURES
DO- 201(DO- 27)
·
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
·
Glass passivated junction or silastic guard junction
(open junction)
1.0(25.4)
MIN
.220(5.6)
DIA
·
1500W peak pulse power capability with a 10/1000μs
Waveform, repetition rate (duty cycle): 0.05%
Excellent clamping capability
.197(5.0)
·
·
·
.375(9.5)
.335(8.5)
Low incremental surge resistance
Fast response time: typically less than 1.0ps from 0 Volts to
V(BR) for unidirectional and 5.0ns for bidirectional types
Devices with V(BR)≥10V, ID are typically less than 1.0μA
High temperature soldering guaranteed:
265℃/10 seconds, 0.375” (9.5mm) lead length,
51bs.(2.3kg) tension
·
·
1.0(25.4)
MIN
.042(1.06)
DIA
.038(0.96)
Dimensions in inches and (millimeters)
MECHANICAL DATA
·
·
Cass: molded plastic body over passivated junction
Terminals: plated axial leads, solderable per
MIL-STD-750, Method 2026
·
·
·
Polarity: Color bands denotes positive end (cathode) except for bidirectional
Mounting Position: any
Weight: 0.045 ounces, 1.2 grams
DEVICES FOR BIDRECTIONAL APPLICATIONS
·
·
For bidirectional use C or CA suffix for types 1.5KE6.8 thru types 1.5K440 (e.g. 1.5KE6.8C,
1.5KE440CA).Electrical Characteristics apply in both directions.
Suffix A denotes ±5% tolerance device, No suffix A denotes ±10% tolerance device
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
·
Ratings at 25℃ ambient temperature unless otherwise specified
Ratings
Symbols
Value
Unit
PPPM
IPPM
Minimum 400 Watts
Peak Pulse power dissipation with a 10/1000μs waveform (NOTE1)
Peak Pulse current with a 10/1000μs waveform (NOTE1,FIG.1)
See Table 1
5.0
Amps
Watts
Amps
Steady Stage Power Dissipation at TL=75℃
Lead lengths 0.375”(9.5mm)(Note2)
Peak forward surge current, 8.3ms single half
sine-wave superimposed on rated load
(JEDEC Method) unidirectional only
PM(AV)
IFSM
200.0
Maximum instantaneous forward voltage at 100.0A for
unidirectional only (NOTE 3)
VF
3.5/5.0
Volts
Operating Junction and Storage Temperature Range
TJ, TSTG
50 to +150
℃
Notes:
1. Non-repetitive current pulse, per Fig.3 and derated above TA=25℃ per Fig.2
2. Mounted on copper pads ares of 0.8×0.8”(20×20mm) per Fig 5.
3. VF=3.5 V for devices of V (BR) ≤200V, and VF=5.0 Volts max. for devices of V(BR)>200v